Description:
Widely used in remote control switches, remote control water pump opening and closing, remote control machine opening and closing, remote control motor forward and reverse, remote control socket, remote control LED, remote control audio, remote control electric door, remote control garage door, remote control retractable door, remote control Rolling shutters, remote control curtains, alarm hosts, alarms, remote control motorcycles, remote control electric cars, remote control MP3, remote control lights, remote control cars, security and other civil and industrial supporting remote control fields, have the advantages of simple supporting, safe and reliable use, and are suitable for the general public The choice for refitting products!
The receiver is powered by 12V or 24V, and the default is 8 independent relay signal output (that is, without voltage output), and the output terminals have normally open, normally closed, and common terminals (all without voltage). This switch can generally be applied to the following two occasions.
1.With 12V or 24V voltage output, this kind of equipment only needs to draw a positive wire from the input end to the common end and then share the negative wire of the input to directly control the 12V or 24 device.
2. Directly connect the normally open end and common end of the output end to other voltage circuits to control its on and off! (The recommended control voltage range is: 3V-250V, current range: 0.1A-10A resistive load)
Product parameters:
Product name: DC12V, 24V 8-way remote control switch
Working voltage DC12V/24V
Working frequency: 315MHZ/433MHZ (default 315MHZ)
Working mode: Jog M4/self-locking T4/interlocking L4/jogging and self-locking coexist
Work-to-code method: Intelligent learning type
Working environment: -40~+80 degrees
Receiving sensitivity: ≥105dBm
Output current: inductive≤3.5A: resistive≤6A
Dimensions: outer shell: 100*80*29mm; inner panel: 92*72*17mm】
Product name: 1000m sticker 8-key remote control
Working voltage: DC12V (12V23A)
Working frequency: 315MHZ 433MHZ (default 315MHZ)
Chip model 1527 or 2264 (different for different batches)
Encoding type: millions of codes or pad type into a password
Oscillation resistance: 4.7 (default)
Modulation method: ASK (stable and less interference)
Remote control distance: 1000 meters (see the description below for the theoretical value of open space without interference)
Dimensions 120*49.8*18mm
Instructions for use:
Working mode and status description:
The receiver has the following 8 working modes can be set, 8 channels are all jog, 8 channels are all self-locking, 8 channels are all interlocked, and several jog and self-locking interlocks are separated. <You can change the work according to your own needs. Method, see the description below for details)
1. Jog: Insert the black jumper on the receiver on the two pins A+L, which means all 8 channels are jog. <Function literal translation: Press and hold the remote control button to work, and release it to stop!>
2. Self-locking: Insert the black jumper on the receiver into the two pins B+L, which means all 8 channels are self-locking. <Function literal translation: the receiver is turned on and off by the same button on the remote control After finishing up, press the remote control buttons in turn, the first button is on, the second button is off, the third button is on, the fourth button is off, and so on!>
3. Interlock: Hang the three pins of the black jumper A, B, and C on the receiver, that is, all 8 channels are interlocked. <Function literal translation: Press the A button on the remote control to open the B button for off or the A button for Close the B button to open. If the remote control has multiple buttons, it will learn which button is on, and all other buttons are off!>
4. 1-4 channels jog. 5-8 channels self-locking: insert the black jumper on the receiver into the two pins of C+L.
5. 1-4 self-locking. 5-8 interlock: insert the black jumper on the receiver into the two pins A+L and B+L.
6. 1-4 way jog. 5-5 way interlock: insert the black jumper on the receiver into the two pins B+L and C+L.
7. 1-2 way jog. 3-6 way self-locking. 7-8 way interlock: insert the black jumper on the receiver on the two pins A+L and C+L.
8. 1-2 way jog. 3-6 way self-locking. 7-8 way interlock: insert the black jumper on the receiver into the two pins A+L and B+L and C+L. can.
Add or delete the instructions for using the remote control:
1. Learning: Press the learning button on the receiving board once the green light is on and release it, then long press any key on the remote control to learn, the green light
After the light flashes quickly, it means that the learning of all keys of the remote control is automatically completed, and the remote control can control operations.
2. The 2262, 2260, 1527 chip equivalent frequency fixed code learning code wireless remote control that can learn more than 20 different address codes;
3. Clear code: long press the key switch for more than 5 seconds, the green light will flash and then go out, indicating that the clear code is successful.
Package included:
1 x Wireless Remote Control Switch Module with shell
1 x Remote Controller(Not included battery)
Reviews
There are no reviews yet.