Overview:
HF series is a new all-in-one hybr1d solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybr1d charging; and two output modes are available, i.e. Inverter and Mains, to meet different application requirements. The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power p0int of the PV array in any environment and obtain the maximum energy of the solar panel in real time.
Features:
1. Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
2. Two output modes: mains bypass and inverter output; uninterrupted power supply.
3. Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybr1d charging.
4. Advanced MPPT technology with an efficiency of 99.9%.
5. Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
6. ON/OFF rocker switch for AC output control.
7. Power saving mode available to reduce no-load loss.
8. Intelligent variable speed fan to efficiently dissipate heat and extend system life.
9. Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
10. 360 ° all-round protection with a number of protection functions.
11. Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
Installation:
Specificaion:
Models
|
HF2420S40-75
|
HF2420S60-100
|
HF2430S40-75
|
HF2430S60-100
|
HF2420U60-100
|
HF2430U60-100
|
AC mode
|
Rated input voltage
|
220/230Vac
|
110/120Vac
|
Input voltage range
|
(170Vac~280Vac) ±2% (90Vac-280Vac) ±2%
|
(90Vac-140Vac) ±2%
|
Frequency
|
50Hz/ 60Hz (Auto detection)
|
Frequency Range
|
47±0.3Hz ~ 55±0.3Hz (50Hz);57±0.3Hz ~ 65±0.3Hz (60Hz);
|
Overload/shor t circuit protection
|
Circuit breaker
|
Efficiency
|
>95%
|
Conversion time (bypass and inverter)
|
10ms (typical)
|
AC reverse protection
|
Available
|
Battery type
|
Lead acid or lithium battery
|
Inverter mode
|
Output voltage waveform
|
Pure sine wave
|
Rated output power
|
2000
|
2000
|
3000
|
3000
|
2000
|
3000
|
Rated output power (W)
|
2000
|
2000
|
3000
|
3000
|
2000
|
3000
|
Power factor
|
1
|
Rated output voltage(Vac)
|
230Vac
|
120Vac
|
Output voltage error
|
±5%
|
Output frequency range (Hz)
|
50Hz ± 0.3Hz 60Hz ± 0.3Hz
|
Peak power
|
4000VA
|
6000VA
|
3000VA
|
4500VA
|
Loaded motor
|
1HP
|
2HP
|
1HP
|
2HP
|
capability
|
Hybr1d charging Max charger current specifications (AC charger+PV charger)
|
Max charg ercurrent
|
0-100A
|
0-120A
|
0-120A
|
0-140A
|
0-100A
|
0-100A
|
Certified specifications
|
Certification
|
CE(EN62109-1)
|
EMC certification level
|
EN61000, C2
|
Operating temperature range
|
-15°C to 55°C
|
Storage temperature range
|
-25°C ~ 60°C
|
Humidity range
|
5% to 95% (Conformal coating protection)
|
Noise
|
≤60dB
|
Heat dissipation
|
Forced air cooling, variable speed of fan
|
Communicati on interface
|
USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control
|
Size (L*W*D)
|
378mm*280mm*103mm
|
Weight (kg)
|
11.5KG
|
Architecture:
Shows the system application scenario of this product. A complete system consists of the following parts:
1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter,or directly invert into AC power to drive the load.
2. Mains or generator:Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected,the system can also operate normally, and the load is powered by the battery and PV module.
3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected.
4. All-in-one solar charge inverter: The energy conversion unit of the whole system.
Specific system wiring method depends on the actual application scenario.
① AC input port
②AC output port
③USB communication port
④RS485/CAN communication port
⑤Dry node port
⑥Grounding screw hole
⑦AC input Overload protector
⑧Cooling fan
⑨Battery port
⑩ON/OFF rocker switch
⑪PV port
⑫Touch button
⑬LED Indicator
⑭LCD screen
Package Included:
1 x HF2430S60 3000W All-in-One Hybr1d Solar Inverter
Reviews
There are no reviews yet.