Description:
16-channel wireless intelligent receiving controller, which outputs switch signals for 16 relays and has a working indicator, which can enable the equipment to be controlled to achieve the forward and reverse of the motor; or the on and off conversion of the switch and various special control procedures Requirements. Mainly used in electric doors, windows, lifting equipment, gateways, elevators, industrial control and security industries and other fields.
The wireless receiving controller has the characteristics of high confidentiality, large storage capacity, stable performance, low power consumption, and is easy to use. It does not need to use traditional jumpers or DIP switch encoding. The wireless signal transmitted by the remote control needs to be The receiving controller receives and stores it, and then it can be used as a complete set. If the learned remote control is lost during use, the information stored in the receiving controller needs to be cleared, and the lost remote control will not be able to remotely control the receiving controller. If you want to regain the right to use, the owner must restart it. It can be used after learning once.
Parameter:
1. Working voltage: 12VDC, 24VDC (optional)
2. Quiescent current: ≤7mA
3. Working temperature: -20℃-+70℃
4. Receiving sensitivity: ≥-105dBm
5. Operating frequency: 315MHz, 433MHz (optional)
6. Control voltage: AC and DC optional
7. Output current: ≤5A
Working method:
DC-15/16L has 5 working modes: signal self-locking, signal interlocking, signal non-locking, signal self-locking and non-locking coexistence
1. Signal self-locking-press the No. 1 button on the remote control to learn
2. The signal is not locked-press the 2nd button on the remote control to learn
3. Signal interlock-press the remote control key 3 to learn
4. Signal 1~8 channels self-locking and 9~16 channels non-locking coexist-press the remote control key 4 to learn
5. The first signal channel is self-locking and 2~16 channels non-locking coexist-press the remote control key 5 to learn
Output method:
1. Signal self-locking: press the remote control key 1 to learn
Press the remote control No. 1 key, the relay corresponding to the No. 1 key is pulled and held, and then press the No. 1 key, the No. 1 relay is disconnected; press the remote control No. 2 key, the No. 2 key corresponds to the relay pull and hold, and then press No. 2 Press the key, the No. 2 relay is disconnected; the 3~16 keys will work in this cycle.
2. The signal is not locked: press the remote control key 2 to learn
Press and hold the No. 1 button of the remote control, the relay corresponding to the No. 1 button will pull in, and the relay will be disconnected when you let go. Press the No. 2 button, and the relay corresponding to the No. 2 button will pull in, and it will disconnect when you release it; 3~16 keys Work in this cycle.
3. Signal interlock: press the remote control key 3 to learn
Press the No. 1 button of the remote control, the corresponding relay No. 1 will be sucked and held. Press the No. 2 button, the No. 1 relay will be disconnected, and the relay corresponding to the No. 2 button will be sucked and kept; the 3-16 keys will work in this cycle.
4. Signal 1~8 channels self-locking and 9~16 channels non-locking coexist: press the remote control key 4 to learn
Among the 15 relays corresponding to the remote control, 1~8 channels are self-locking function, and 9~16 channels are non-locking function.
5. Co-existence of signal 1st channel self-locking and 2~16 channels non-locking: press the 5th key of the remote control to learn
Among the 16 relays corresponding to the remote control, the first channel is self-locking function, and the 2~16 channels are non-locking function.
Note: If you want to change the learned receiver to other functions, please clear the receiver first and then re-code and learn.
Study method:
1. Press the learning button on the receiver and make it go and enter the learning state; according to the function you need, choose to press a key on the remote control to learn. After the receiver receives the signal, the indicator flashes about once to indicate successful learning.
Removal method:
Press and hold the learning button on the receiver for about 8 seconds until the indicator light goes out, indicating that it has been cleared successfully. This receiver can store about 30 remote controls with different codes.
Package included:
1 x Switch
1 x Remote controller
Availability: 
Shipping: Free Airmail 
Reviews
There are no reviews yet.