Specification:
Brand Name: Betafpv
Model: X-Knight 4
Item Name: 160mm F4 AIO 20A ESC 4S 4 Inch Toothpick FPV Racing Drone
X-Knight 4 160mm Frame Kit
|
Material: T700 Carbon Fiber Wheelbase: 160mm Weight: 24.43g, Frame Height: 8mm Top plate thickness: 1.5mm Bottom plate thickness: 1.5mm Arm thickness: 4mm Battery protected plate thickness: 1.5mm
|
F4 Flight Controller AIO 20A ESC Board |
Model: 20A Toothpick AIO FC V3
CPU: STM32F411CEU6 (100MHZ)
Six-Axis: MPU6000 (SPI connection)
Size: 32.5*32.5mm (26.5mm mounting holes)
Firmware version: BETAFPVF411 (BEFH)
OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
Support programmable LED like WS2812 etc
Built-in current sensor
Weight: 6.63g
Onboard 20A BLheli_S 4in1 ESC
Support BLheli/BLHELI_S suite Pass-through ready Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 Input Voltage: 2-4S Lipo Continuous Current: 20A Peak Current: 25A Firmware: BLHELI_S Motor Connectors: 1.25mm header pins connector
|
1505 3600KV Brushless Motor |
Weight: 13.08g (1 pc) Shaft: φ1.5mm Motor Mount Holes: M2 KV (rpm/V): 3600KV Input Voltage: 3-4S LIPO Cables: 80mm long, 24AWG cables
|
HQProp 4025 2-Blade Propeller |
Material: Poly Carbonates Length: 4 inches, about 101.6mm Color: Clear Gray Mounting hole: 1.5mm
Quantity: 2 CW & 2 CCW Weight: 1.4g/PC
|
A01 5.8G 25/200mW VTX
|
Output power: 0mW, 25mW and 200mW (Adjustable)
Supply Voltage: 5V. NOT support connect to the 1S battery directly
Weight: 2.0g
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
Blue LED |
Red LED |
Power Status |
Flash Solid |
OFF
|
25mW |
Flash Solid
|
Flash Solid
|
200mW |
OFF |
Flash Solid
|
Pit Mode |
How to Change Frequency & Channel & Power?
Only support frequency and power change through the SmartAudio interface.
Method 1: Use the OSD menu. Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -> VTX SA to change the frequency and power.
Method 2: Use the Betaflight GUI command. We could also use the Betaflight CLI commands to change the frequency and power of the VTX.
|
Caddx Ratel 1200TVL FPV Camera
|
Image Sensor: 1/1.8′ Inch starlight HDR sensor Horizontal Resolution: 1200TVL FOV: 180 Degree Min. Latency: 8ms TV System: NTSC & PAL (changeable) Image: 16:9 & 4:3 (changeable) WDR: Super WDR (HDR) Min. Illumination: Starlight Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio: >60dB (AGC OFF) Video Output: CVBS Camera OSD: Separate OSD DNR: 3-DNR
|
Recommend Lipo Battery (NOT Included) |
Recommend Use 4S 850mAh 75C Lipo Battery XT60 Plug
|
Features:
– The lightweight 4-inch toothpick below 250g even if you connect with the battery, meet the current requested of FAA rules.
– Assembled 4” frame kit, which adopts T700 carbon material becomes ultimate durability while maintaining minimal weight 24.43g.
– The first carbon fiber series installs Betafpv Toothpick 20A 2-4S AIO flight controller, which can supports up to 25A continuous currents.
– Integrates with 1505 3600KV motor, X-Knight offers unparalleled execution in thrust and control.
– Supports up to 850mAh 4S battery. It has plenty of power and punches to do all the tricks and flips you want.
Package Included:
1x X-Knight 4Inch Toothpick FPV Drone
1x Set of M2*7 Screws
Reviews
There are no reviews yet.