Bitfunx RetroScaler2x AV to HDMI Converter Adapter Line-doubler for Retro Game Consoles PS2 N64 NES Dreamcast Saturn

Feature:

Retroscaler2x can accept 240p/480i/288p/576i ntsc/pal signal source to 480p/576p HDMI compatible output (480p to ntsc, 576p to pal) converter. For example, 240p signals are correctly supported, allowing fully progressive linedouble at 480p. The 480i signal is deinterlaced and dubbed equally at 480p. Keep in mind that the output resolution of this device is only 480p/576p at the highest

Zero Latency: Retroscaler2x is a zero-delay device that has been verified by many different measurements and devices.

Compatible area: Both ntsc and pal signals are supported, but they will not be converted to each other. This means that you can connect to any signal compatible with the target device, but ntsc may not work on HDMI pal compatible devices, and vice versa

Filter mode: The fil mode is completely based on preference, but general retro gamers prefer to turn off the fil mode for 2d games (snes, genesis, etc.) and 3d games (n64, saturn, etc.). In addition, fil mode can help reduce flicker in some 480i-only games

Compatibility: Another important feature of retroscaler2x is that it generates a real 480p60 signal, making it compatible with all the devices I have tested! Compatibility is a big issue for retro gamers, because modern screens are not used for the resolution or refresh rate of these old game consoles. This device is an excellent help for anchors who want greatest chance of compatibility

Audio performance: The audio performance on retroscaler2x is good, although we have to stop saying it is perfect. In general use, there is no problem with audio digitization, but it sounds like an explosion on the bra, and the output may sound rougher than through ossc. This is not something you might notice on your TV speakers, although you might notice if you have an external amplifier or home theater system. In this case, of course, in any case, it is usually very easy to locate the audio around the retroscaler2x

Transit: By placing the retroscaler2x in pass-through mode, composite, s-video or component input signals are simply transparent and digitized to HDMI compatible. In the HDMI compatible world, support for 240p is rare, but by adding a simple HDMI compatible to VGA converter, you can convert the signal back to the analog domain again. This makes the unit a perfect transcoder that can be used with 15khz exposures such as pvms or ossc

Compatible with the following hosts: Vic20/Atari2600/Msx/NES/N64/NGC/SFC/SNES/SuperFamicom/PIAYSATION2/SEGA Saturn/MD2/MD1/Dreamcast/Commodore64 (C64)

Product box size: 22.5×21.5×5.5cm

Product box weight: 480g

Connecting your RetroScaler2x:

Connect a suitable source to the composite, component (YPBPR) or S-video connectors.(The inputs can only be used one at a time and it’s strongly suggested that you do not leave consoles plugged in at the same time, even if they are off)

Ensure you are connected to the USB power, and then switch on your RetroScaler2X

Connect to the display via HDMI-compatible interface, and then play your games

Select the appropriate video mode through button according to your needs

Buttons, connectors and external controls:

Component video input: Connect component video (YPBPR) or RGB with sync on green sources to this input. As a note, the chip used in this device does not support RGB, so an RGB SCART input will never be an option

S-video input: Connect an S-video (4 pins connector) source to this input, other sources are not support

AV input: Standard composite (RCA) connector. You can connect sources such as for Nintendo Super Famicom, for Nintendo for GameCube, N64 etc.

HDMI-compatible video out: All the received video and audio signals will be output on the modern LCD monitor/TVs with HDMI-compatible interface

Power input: Any decent quality Micro USB charger can be used to power the RetroScaler2x, as it’s a very efficient device. Your are even able to power mine via the USB ports of your TV

Power Switch: Toggles power off and on

Input Select (INPUT SELECT): The input button selects between the composite, S-Video and Component Video inputs, or combination

Output Select (SMOOTHING): The smoothing mode button allows you to chose which video mode it’s in

2x Mode (orange led light on ): This is the standard ‘LINEDOUBLE’ mode that outputs 480p/576p. This is the mode that’s the system defaults to when powered on

FIL (blue led lights on): This mode adds a filtering option to to minimize image aliasing for the 480p/576p output

Pass-through (both orange and blue LEDs light off):This mode simply output whatever the input signal is, without changing the resolution

RetroTINK2X and OSSC:

You can simply use the two devices in tandem, support both composite video and s-video and advanced features of ossc. Piggybacking the RetroScaler2x to the OSSC is very easy .All you need is a simple HDMI-compatible to VGA adapter. We will be carrying a tried and tested model in our store that fully supports 240p output and does not appear to crush blacks or over-saturate whites. With a suitable adapter in hand, set the RetroScaler2X to transcode mode, connect the HDMI-compatible to VGA adapter to your RetroScaler2X, then connect the output of the adapter into your OSSC via the VGA port. Finally, switch the VGA port on the OSSC to 480p mode (Sampling opt->480p in sampler->DTV 480p).you have access to the OSSCs famous scanline engine and line multiplication modes with all your composite video and S-Video sources. You can also access things like the advanced timing tweaker, allowing you to center the image using the backporch controls or apply a little faux zoom using the V.Active controls

Note:

RetroScaler2X does not support all PAL-MConsoles in Brazil

Please observe the following safety precautions when using your Retro Scaler2x

Use the correct power supply: the Retroscaler2x is powered by a regular 5 volt Micro USB port that can be powered by a normal power supply or powered by a device that has a USB port. Please make sure that the power supply you are using meets any of the above requirements. Never use a power supply that is not regulated to prevent damage to the equipment

Turn off the power before connecting/disconnecting the device: to prevent damage to the device for ICs, always turn off the power before connecting the monitor or device

Do not expose to moisture Droplets of moisture: may contact the PCB and cause a short circuit. Never submerge the unit in water

Keep away from fire or high heat sources: RetroScaler2X is not flammable but high temperatures, such as those from a fire or electric heater may melt the plastic casing

Please supervise children: Retro is not a toy and is not designed for use by children. Please supervise children if they use the Retro

Package Included:

1 x RetroScaler2x HD Converter(Other products are not included)

1 x UK Plug

1 x EU Plug

1 x AU Plug

1 x US Plug

1 x Multi-plug Adapter

1 x User Manual