Note: If the output current exceeds 5A, a fan needs to be added to enhance heat dissipation.
Overview:
The DKP6008 DC-DC digital control step-down module is a programmable step-down module with full digital display, which is small in size, high in power, high in efficiency and stable in work. It adopts advanced microprocessor control, the voltage and current are accurately adjusted by buttons, and can be output at constant voltage and current. Through the reserved port, it can communicate with a single-chip microcomputer or a computer to facilitate secondary development. Equipped with a four-digit eight-segment LED digital tube, which can display the output voltage and current in real time. At the same time, the digital control step-down module has a working status indicator, which can check the working status in real time. After the machine is powered on, it has an automatic output function, which can be turned on or off as needed. In addition, the machine also has a key lock function, which can lock the parameter adjustment keys to prevent misadjustment of the output voltage and current parameters.
Features:
1. The use of advanced microprocessor, the button can accurately adjust the output voltage and current;
2. Using 4-digit high-brightness digital tube, it can display output voltage, current, capacity and time in real time;
3. It can be set to output automatically after power on;
4. The parameter adjustment buttons can be locked to prevent misoperation from adjusting the output voltage and current parameters.
5. It can communicate with single chip microcomputer or computer through the reserved port, which is convenient for secondary development
6. The use of high-quality power devices and the CV and CC loops formed by peripheral precision op amps greatly improve the performance of the module;
7. Two 0.8mm double-wire winding high current inductors are used. The input uses two 470uF/100V electrolytic capacitors, and the output uses two 1000uF/63V electrolytic capacitors. It has its own fan for heat dissipation, low temperature rise, and very good output voltage quality. ?
8. All digital display, convenient and easy to use;
9. It can output with constant voltage and constant current;
10. The module has working status indicators, which are output OUT, constant voltage CV, and constant current CC indicators, which can check the working status in real time;
Specification:
Input voltage range: 6V~65V
Output voltage adjustment range: 0~60V
Output current adjustment range: 0~ 8A
Output power: 0~400W
Output voltage setting resolution: 10mV
Output current setting resolution: 10mA
Power effect: CV is less than 0.5%+10mV, CC is less than 1%+10
Load effect: CV is less than 0.5%+10mV, CC is less than 1%+10
Output ripple: <40mVpp (input 54V, output 12V, current 5A)
100Hz fluctuating transmission ratio: <1/1 0000
Typical efficiency: 88% (input 54V, output 36V, current 3A)
Voltage and current display accuracy: 10mV, 10mA
Voltage display error: ±1%+20mV
Current display error: +2%+ 20mA
Response time: <50ms
Storage operation: 10 sets of parameter storage from M0~M9
Heat dissipation method: onboard radiator, please pay attention to ventilation
Operating environment temperature: 0~40C
Storage temperature: -20~ 70°C
Use environment: indoor use design, maximum humidity 80%
Size: 104*59*46mm
Package Included:
1 x DKP6008 60V 8A Digital Step-down Power Supply
Reviews
There are no reviews yet.