Features:
Combination of 4000 count auto-range true RMS DMM and multimeter.
DMM functions includes true RMS AC/DC voltage and current, resistance, capacitance, frequency, duty cycle, dBm, diode and continuity tests.
Full auto-setup for volt/division and time/division of DSO.
Screen hold function.
Save and recall up to 100 waveform and data.
High contrast FSTN LCD with white LED backlight.
Auto power off in 5 to 60 minutes or continuous on.
Inner Li-ion polymer battery with AC adapter.
Isolated USB/RS232 interface with PC.
Specifications:Digital Storage Oscilloscope
Simulation bandwidth |
DC~20MHz(50mV/div ~ 10V/div) |
Maximum real-time sampling rate |
80Msps |
The vertical resolution |
8 bits |
Nonlinearity |
±1 bit |
Channel number |
1 |
Coupling |
DC/AC/GND |
Input impedance |
about 10MΩ |
indexing |
Vertical ±4.8, horizontal 12.8 |
Vertical sensitivity range |
50mV/div ~ 200V/div |
When range |
0.20μs/div ~ 20s/div |
Vertical amplitude precision |
±(5%+ 0.1div) |
When the yankees accuracy |
±(0.01% + 0.1div) |
Automatic zero reference |
In DC/dB measurement |
Scanning mode |
Auto/normal/single |
Trigger level |
± 12 div (At each step, 0.1div) |
Trigger slope |
Rising along/down along |
Trigger position adjustment |
± 6 div (At each step, 0.1div) |
Automatic Settings |
When the vertical amplitude and automatic Settings |
The cursor measurement function |
dV, dt, 1/dt (Frequency) |
Automatic measurement function |
Vp-p, Vavg, RMS, dBm |
Automatic measurement accuracy |
±(5%+ 0.1div) |
Record length |
12.8div |
20MHz refers to simulate bandwidth to 3db voltage when the attenuation of bandwidth, when the input signal interference, change with ADP08 and special high frequency shield.
1-2-5 for vertical attenuation switch range.
Digital Multimeter
Function |
Range |
Resolution of |
Uncertainty |
DC voltage |
400.0mV |
0.1mV |
±(0.8%rdg + 10dgt) |
4.000V |
1mV |
±(0.8%rdg + 10dgt) |
40.00V |
10mV |
400.0V |
100mV |
1000V |
1V |
±(1.5%rdg + 10dgt) |
AC voltage
True RMS |
400.0mV |
0.1mV |
50Hz~400Hz ±(1.2%rdg + 10dgt) 400Hz~2kHz (10kHz These will not be examined) ±(2.0%rdg + 10dgt) |
4.000V |
1mV |
40.00V |
10mV |
400.0V |
100mV |
750V |
1V |
±(1.5%rdg + 10dgt) (50Hz~400Hz) |
DC current |
40.00/400.0mA |
10µA /100µA |
±(1.2%rdg + 10dgt) |
4.000/20.00A |
1mA /10mA |
AC current True RMS |
40.00/400.0mA |
10µA /100µA |
±(1.5%rdg + 10dgt) 50Hz~2kHz (5kHz These will not be examined |
4.000/20.00A |
1mA /10mA |
Resistance |
400.0Ω |
0.1 Ω |
±(1.0%rdg + 5dgt) |
4.000kΩ |
1 Ω |
40.00kΩ |
10 Ω |
400.0kΩ |
100 Ω |
4.000MΩ |
1kΩ |
40.00MΩ |
10kΩ |
±(3.0%rdg + 5dgt) |
Capacitance |
51.20nF |
1pF |
±(2.0%rdg + 10dgt) |
512.0nF |
10pF |
5.120μF |
100pF |
51.20μF |
1nF |
100.0μF |
10nF |
±(5%rdg + 3dgt) |
Frequency |
5.12Hz ~ 10MHz |
0.1Hz ~ 10kHz |
± (1.0% rdg + 5dgt), (signal amplitude is not less than 1Vp-p, AC V or 20mA RMS, AC A) |
Duty |
0.1~99.9% (AC 1Vp-p) |
Diode test |
Open circuit voltage of about 1.5 V, the maximum test current of about 1.5mA |
Continuity test |
Determine resistance: approximately 30Ω |
Automatic range switching |
Can be applied to each measurement function |
Range overflow Tips |
“O. L” (Over load) |
Multimeter to measure the rate of |
2.5 times / second |
Dynamic Data Window |
Continue after the main display dynamic refresh to keep the actual measurement data |
dB (-80 ~ +80 dB) reference impedance |
2, 3, 8, 16, 50, 75, 93, 110, 125, 135, 150, 300, 600, 900, 1000, 1200 Ω |
Fuse Size |
Φ5×20,0.5A/250V Φ10×38,20A/500V |
General Information:
Display |
128 x 128 pixel graphic LCD |
Viewing Area |
71.7mm x 71.7mm |
Back Light |
White LED, 3 levels of brightness |
Input Impedance |
10MΩ |
Power |
Inner Polymer Li-Ion Battery or AC adapter |
Auto Power Off |
5~60minutes adjustable with disable feature |
Indication of low power |
|
Charging time |
About 3hrs |
Battery life |
12~16hrs approx. (vary with different models) |
Memory |
100 records (both DMM data and DSO waveform)* |
Operational conditions |
0°C to +50°C (+32°F to +122°F); < 75%RH |
Storage conditions |
-10°C to +60°C (-14°F to 140°F) |
Dimensions |
86mm x 186 mm x 32mm |
Weight |
325g |
Package Included:
1 x EONE ET310A 2 in 1 20M 80Msps Digital Handheld Storage
1 x Test Probe
1 x USB Cable
1 x Charging Plug
1 x Oxford Bag
Detail Pictures:
Reviews
There are no reviews yet.