Specification:
Screen: 4.3′ LCD
Camera: 720P
View angle: 145°
IR LED: 2PCS LED
PIR: Support
Memory Maximum: support 32G memory card
Take pictures: Support taking pictures
Video: Record video with sound, duration 10 seconds
Output format: jpeg/avi
Power supply: 2400mAh lithium battery
Door hole diameter: 14-50mm
Door thickness: 30-120MM
Packaging weight: 0.5kg
Packaging size: 184 x 125 x 73mm
Menu Settings:
After power on, in standby mode, long press the menu button for 3 seconds to enter the menu page, press the left and right buttons to switch options, and long press the menu button again to exit the setting interface.
The menu page contains 8 items:
1. Language selection: The menu language can be set to Chinese or English.
2. Recording mode: can be set to photo or video mode. The recording mode consumes more power, which will increase the charging frequency of the machine.
3. Motion detection: You can turn on or off the motion detection function. After the motion detection function is enabled, when an object moves in front of the camera, the machine will automatically take a picture or record a video. When motion detection is enabled, it will increase the power consumption of the machine.
4. Screen off time: 15 seconds / 25 seconds / 35 seconds / normally open, there are 4 options. When ‘Always On’ is selected, the screen will not automatically turn off until the battery is exhausted.
5. Ringtone switch: When ‘Off’ is selected, pressing the ringtone will not ring.
6. Ringtone selection: There are 12 ringtones to choose from.
7. Ringtone size: There are high/medium/low options.
8. Time setting: year, month, day, hour, minute, second can be set.
9. Format the memory card: Formatting will delete all recorded contents.
10. Restore factory settings: Execute restore factory settings, that is, restore to factory default settings.
11. Software version: For reference when the factory is repairing.
Function operation:
Power on: Press the ring button of the outdoor unit or the monitor button of the main unit.
Power off: Press and hold the monitor button for 3 seconds or click the reset button.
Recording mode: The camera supports two recording modes: photo and video, which can be set in the menu.
Photo/video: Press the bell key or monitor key to take photo/video.
Bell: When the visitor presses the bell button, the indoor unit will ring, turn on the display, and take a photo or start recording at the same time.
Enter and exit the menu interface: long press the menu key (left selection key) for 3 seconds.
Enter the picture browsing interface: long press the browse key (right selection key) for 3 seconds.
Installation steps:
Step 1: Select screws of suitable length according to the thickness of the door, and screw the screws into the protruding rod screws of the outdoor unit.
Step 2: Tear off the release paper on the anti-skid pad at the bottom of the outdoor unit, pass the guide rod and the cable together through the hole and stick the outdoor unit on the door with force (pay attention to the direction of the outdoor unit:
The detection probe is directly above, and the bell button is directly below.
Step 3: Take out the zinc alloy hanging plate (the end marked ‘UP’ is facing up), pass the cable through the small square hole on the hanging plate, snap the screw into the gourd hole on the hanging plate, and tighten the screw
Nail until the siding and outdoor unit are securely fastened.
Step 4: Snap the cable to the connector socket on the back of the indoor unit.
Step 5: Align the 4 slots on the back of the indoor unit with the 4 protrusions on the hanging plate, and then pull the indoor unit down to the locked state.
Step 6: Insert the TF card and the installation is complete.
Package included:
1 x Outdoor unit
1 x Indoor hosts
1 x Stand
3 x Screws
1 x USB cable
1 x User manual
Reviews
There are no reviews yet.