Specification:
Brand
|
Fireflies
|
Model
|
T9R
|
Material
|
6063-T6 aluminium
|
LED
|
Osram CULNM1.TG
|
Max Output & Intensity
|
1500 Lumens, 5700K
|
Operating range
|
2.7V to 4.3V
|
Battery
|
1 x 21700/18650 (not included)
|
Dimensions
|
65×26.5x167mm ( Head x body x length)
|
Weight
|
About 199g
|
Features:
1. Battery reverse polarity protection
2. +-1C factory calibrated thermal accuracy
3. Optimized low parasitic drain (if aux. LEDs disabled )
4. Water resistant IP66
5. Removable Metal pocket clip
6. High performance copper thermal sink for LEDs
7. 6-pin programming pads on driver board for hobbyist customization
User Interface:
1. Latest Anduril2 open-source firmware with Simple and Advanced UI
①Simple UI: 6A maximum regulated current
②Advanced UI: 6A maximum regulated current with Turbo
2. Fully configurable modes of operation: smooth ramp to stepped ramp
3. Fully configurable auxiliary LED effects and modes
4. Automatic, manual, or memory modes
5. Continuously monitored battery current, voltage, and temperature with 2.8V battery cut-off
6. Ability to customize highest and lowest output levels
7. Ability to customize thermal regulation (50C by default)
8. Large variety of beacon, SOS, tactical strobes, and special effects including:
①Candle flicker, thunderstorm, bicycle light, sunset timer and more!
9. Readout of battery voltage, internal temperature
10. Electronic factory reset capability
11. Lock-out mode capability
Operation Guide:
1. The T9R flashlight features the advanced open-source user interface firmware, Anduril2. For full details of operation, please see the detailed manual: http://toykeeper.net/torches/fsm/anduril2/anduril-manual.txt
2. At the first glance of the UI , most fresh users will feel confused with the UI, But in fact , you can operate the light as easy as other common flashlights. Just in case you want to try more functions , you need to spend some time to read the manual . If you do not need the advanced features, just do not use it.
3. Anduril2 has two different operating user-interfaces.
① Simple UI – Stepped 5-mode ramping default (Easy to operate for any fresh users)
②.Advanced UI (need to spend some time to read the manual carefully) Enter advanced UI to unlock all the features available. It is simple to switch between Simple and Advanced UI.
Note:
Anduril2 has the capability to adjust battery voltage correction and temperature calibration. The T9R flashlight comes with 1% voltage accuracy and +-1C temperature accuracy from the factory and does not need to be calibrated by the user.
Quick Start:
After insertion of the battery and screwing on the end cap, the light will blink quickly once to confirm that it is operational.
More Advanced Functions:
1. To access additional modes, switch to the Advanced UI (Read the manual carefully) .
①- Click ten times and hold the last click. The flashlight will flash once, indicating that it is now in advanced UI
②- When in advanced UI, simply click ten times without holding the last click to transition back to simple UI.
Electronic factory reset capability:
There is 2 ways for factory reset, back to Simple UI by default
1.When the light is off, 13 clicks and hold , See blink signal , back to Simple UI
2. loose a bit the flashlight body, then hold the switch , re-connect the body to the head, see blink signal, back to Simple UI
Manual:
http://toykeeper.net/torches/fsm/anduril2/anduril-manual.txt
Package Included:
1 x Fireflies T9R Osram 15W Thrower Flashlight
1 x Clip
Reviews
There are no reviews yet.