Description:
Foxwell NT634 OBD2 Automotive Scanner 4 System Diagnosis DPF SAS TPS EPB Oil Reset Service Car Diagnostic Tool
Features:
1. Car Diagnostic Tool
NT634 is delicately designed for pros and enthusiasts to pinpoint engine, transmission, ABS and airbag faults on major American, Asian and European makes. It offers technicians accurate,stable and easy diagnosis and more special functions. It solves 95% of the services you tackle with everyday. It’s a super cost-effective product.
2. Find Troubles More Accurately
NT634 shows live vehicle sensor date in text and graph format and allows you to focus on any suspicious and symptom-specific date parameters. It record live sensor date and playbacks records to capture intermittent fault whenever they happen.
3. Four Main System Diagnstic
Help user read clear code and live date in Engine, Transmission ABS SRS System.
-Diagnostic Engine System: The diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
-Diagnostic Transmission: It makes great sense in the safe driving when your car is slipping or difficult to shift. This diagnostic scanner can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.
-Diagnostic ABS System: Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.
-Diagnostic SRS Airbag System: SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.
4. Support Full OBD2 functions
-Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs).
-Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
-Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
-I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
-Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
-View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
-O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
-On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
-Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
-Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
5. Support 11 Kinds Popular Reset Service
-Oil Light Reset: allows you to reset the service lamps on the instrument cluster.
-EPB Service: allows you to perform the service and maintenance of brake systems, including deactivation and activation of the brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on multiple brands of vehicles where electronic brake systems are fitted.
-Battery Configuration: lets you to have new battery validated, clear faults from the dashboard and display current battery details of the vehicle.
-DPF Regeneration: lets you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter.
-TPS/TBA: Using the throttle position sensors in the throttle body, the ECU learns the full open and full closed positions through various states (idle, part throttle, WOT) known as a Throttle Body Alignment (TBA).
-SAS Calibration: lets you perform calibration of the Steering Angle Sensor, On successful calibration of the sensor, its fault memory is automatically cleared.
-CVT(Continuous Variable Transmission): used to reset the compensation code and initialize the ECT after a solenoid valve or valve body assembly has been replaced.
-Gear Learn: Crankshaft position sensor adaptive learning.
-TPMS Programming Service: allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated.
-Injector Coding: Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.
Specifications:
Type
|
Code Readers & Scan Tools
|
Brand
|
Foxwell
|
Model
|
NT634
|
Hardware Version
|
Newest
|
Software Version
|
Newest
|
Material
|
Plastic
|
Size
|
20cm*11cm*3cm
|
Weight
|
1.8kg
|
Upgrade
|
Lifetime Free update Online
|
4 System Check
|
Engine/ABS/SRS/Transmission
|
Reset Service 1
|
EPB/OIL/BRT/SAS/DPF/TPS
|
Reset Service 2
|
Gear Learning/Injector/TPMS/CVT
|
OBD2 Code Reader
|
EOBD OBD OBD2 Automotive Scanner
|
Language
|
English, Korea, Spanish, Portuguese, French, Swedish, Dutch, Japanese, Italian, Russian, German
|
Lifetime Free Update online
with internet access, you will always have the latest bug fixes, new vehicles, newly added parameters and functionality at your fingertips
How to update online?
NOTE: NT634 use new program to update. not foxscanner, please go to new website (check back of scanner) download FoxAssist. or you can contact me directly.
1. Go to the Foxwell official website :Choose your product ,Under the page,click the Download,then download FoxAssist Installer.zip update clients software.
2. Register foxwell account and complete the related information at FoxAssist client software .
3. Connect NT634 with computer by USB, click ‘Activation’ menu.
5. It can indentifies your sn number automatic, choose your sn number and click Activation
6. Go to ‘Download’ page, choose all software, and then click ‘upgrade’
6. Wait several minutes, update will be done, enjoy new software
Package Included:
1 X
|
NT634 Product
|
1 X
|
Box
|
1 X
|
OBD Cable
|
1 X
|
USB Cable
|
1 X
|
User’s Manual
|
1 X
|
Warranty Card
|
1 X
|
Quick Start Guide
|
NOTE: NO Built-in lithium battery, NO Charger (needn’t charge)
Reviews
There are no reviews yet.