Specification:
Brand Name: iFlight
Model: Alpha A75 Analog ( FPV RTF Version)
Wheelbase: 75mm
Weight: 66.9g (without battery)
SucceX-D 20A Whoop F4 AIO FC ESC
|
Brand Name: iFlight
Item Name: F4 Flight Controller AIO 20A ESC Board
Size: 30.5×30.5mm ( Mounting Hole: 25.5×25.5mm, M3) Connector: Micro-USB MCU: STM32F411 Gyroscope: MPU6000 Blackbox: 8MB BEC Output: 5V 2A INA pad: nR2 Barometer: no Constant Current: 20A; Burst Current: 25A
Input: 2-4S Current Sensor: yes BLHeli: BLHeli_S ESC Telemetry: No Firmware Target: IFLIGHT_F411_PRO ESC Firmware:G-H-30 BLS
|
XING-E 1103 8000KV Brushless Motor
|
Brand Name: iFlight
Model: XING-E 1103
Weight: about 3.8g(with 30AWG 32mm length) Shaft: φ1.5mm Motor Mount Holes: M1.6 on Dia 8.5mm KV: 8000KV Input Voltage Voltage: 2-3S Lipo battery
|
HQProp 40mm & Gemfan 1635 Propeller
|
Item Name: HQProp 40mm 4-Blade & Gemfan 1635 3-Blade Prop
Quantity: 4 CW & 4 CCW ( HQProp 2 Pairs & Gemfan 2 Pairs)
Color: Color May Vary
|
5.8G SucceX Micro 300mW VTX
|
Power: PIT/25/100/200mW/300mW Antenna interface: IPEX (UFL) VTX protocol : IRC Tramp Size: 13.5×14.5mm Weight: 1.4g Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g
|
Runcam Nano 2 700TVL FPV Camera
|
Image Sensor: 1/3′ CMOS
Horizontal Resolution: 700TVL
Lens: 2.1mm
Signal System: NTSC ( 4:3)
D-WDR: Auto
Power: DC 3-5.5V
Net Weight: 3.2g
Dimensions: L14mm*W14mm*H16mm
|
R81 Receiver |
Frequency: 2400-2483.5Mhz Dimension: 17*11mm Weight: 2g Numbers of Channel: 8 Signal form: D8 Output Formal: SBUS inverted / output RSSI Operating Voltage: 4.5-6V Antanna Length: 9cm
|
iF8 Radio Transmitter |
Size: 160*130*45mm Weight: 233g Frequency: 2.400GHZ-2.480GHZ RF Module: Multi-Protocol Module Compatible (CC2500) Protocol Options: D8 / D16 v1 FCC / D16 v1 LBT / D16 v2 FCC / D16 v2 LBT (No Frsky ACCESS support) Max. Tansmission Power: 20dB Antenna gain: 2dBi Range: 1~2km @ 20dB (depending on noise floor and RX) Battery: Built in 3.7V 1000mAh Lithium battery Charging: Built in USB-C charging Firmware: OpenTX iF8 Edition (Special iF8 Edition) Multiprotocol-TX-Module(Stick input protocol selection) Channels: Up to 8 channels (depending on the model / receiver)
|
iFlight FPV Goggles with DVR Function
|
Frequency: 40CH 5.8GHz Built-in battery: 3.7V/2000mAh Battery Size: 155*144*113mm Weight: 295g with 3.7V 2000mAh battery Headband: 3-Sided Adjustable Headband Screen size: 4.3 Inch Resolution: 800*480 (no blur after enlarge by the lens) Brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV TF card: support up to 32G
|
Fullsend 3S 450mAh 75C Lipo Battery |
Minimum Capacity: 450mAh
Configuration: 3S1P / 11.1V / 3 Cells Discharge Rate: 75C Net Weight: 39.2g Dimensions: 19.5*16.5*63mm Charge Plug: JST-XHR-4P Discharge Plug: XT30
|
M4 AC 30W 1-4S Battery Charger-XT30
|
Input: AC100-240V@MAX30W Battery Type: LiPo LiHV LiFe @1-4S Charging Power: 0.5-2.5A@25W Bal Cur. : 200mA @2-4S Charging accuracy: <0.005V Display: LCD IPS 1.54 inch 240*240 resolution Size: 75mm*54mm*30mm Weight: 120g Connector: XT30 Suitable for 4S 350mAh~850mAh LiPo Battery.
|
Pacakge Included:
1x Prebuilt and tested Quadcopter
1x Alpha 78mm Frame
1x RunCam Nano2 Camera
1x 5.8G SucceX Micro Force VTX 300mW
1x iFlight Albatross RHCP 5.8g light antenna
1set x HQ 40mm 1.6 inch 4-blades (Set of 2 – Color May Vary)
1set x Gemfan 40mm 1.6inch 1635 3-blades (Set of 2 – Color May Vary)
2x 10*130mm iFlight Lipo Strap
1x iF8 Remote controller
1x R81 receiver
1x iFlight FPV Goggles
3x FULLSEND 3S 450mAh Batteries
1x Battery Charger
Reviews
There are no reviews yet.