Introduction:
Nazgul5 V2 is a 5′ size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!
Note: R81-SPI Frsky (Compatible with Frsky ACCST D8)
Tips:
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.
Description:
Brand: iFlight
Item Name: Nazgul5 V2 Analog LED Version FPV Racing Drone
- SucceX-E F7 45A flight stack
- XING 2207 with LED Light FPV Motor ( 6S 1300KV)
- Wheelbase: 240mm*240mm
- Body size: 170*170mm
- Propeller size: 5 inch /5.1 inch
- FC pattern: 30.5*30.5/20*20 mm
- FPV cam spacing: 19mm
- Weight: 399g (without battery)
Features:
– 5mm arm design for more durability
– Easy-Swap arms
– LED illuminated Logo
– XING 2207 motors with LED Light
– 5′ version also fits 5.1′ style propellers
– Popular True-X configuration
– TPU crash-guards
– Fits both 30.5x and 20x stacks
XL5 V5 Frame |
- Wheelbase: 240mm*240mm
- Body size: 170*170mm
- Propeller size: 5 inch /5.1 inch
- FC pattern: 30.5*30.5/20*20 mm
- FPV cam spacing: 19mm
|
SucceX-E F7 Flight controller |
– MCU: STM32F22RET6 216MHz
– Gyro: MPU6000
– Baro: DSP310
– OSD: IFLIGHT OSD (AT7456E)
– BEC: 5V 2.5A
– BlackBox: 16MB
– Uart: 4*UART(UART1、UART2、UART4、UART5)
– UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry
– UART2 for Receiver
– UART4 for Free
– UART5 for ESC Telemetry
– 4×Dshot/PWM outputs
– Smartaudio & IRC Tramp VTX protocol supported
– WS2812 led Strip: Yes
– Bepper: Yes
– Firmware: IFLIGHT_SUCCEX_E_F7
– Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
– Weight: 6.9g
– Mounting hole: 30.5*30.5mm,φ4mm
– Size: 36*36mm
|
SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC |
– Dimension: 36*43mm
– Mounting Holes: 30.5*30.5mm/Φ3mm
– Weight: 15g (without wire)
– Supports 2-6S Lipo input
– EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
– Current sensor: YES
– BEC: NO
– Constant: 45A / Burst: 50A
– Supports: DShot150/300/600/MultiShot/OneShot etc.
– Target: G-H-30 BLS 16.7
|
SucceX Force 5.8g 800mW VTX Adjustable |
– Item: SucceX-Force 800mW adjustable VTX
– Input voltage:5V
– Output voltage/ Max current: 5V 1A
– 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@400mW, 380mA@800mW
– Output 48 frequency points,
– PIT/25mW/200mW/400mW/800mW
– The output power is stable;
– Frequency lock fast, the boot does not interfere with companions;
– Built-in output power self-check function;
– Full format video format: NTSC /PAL;
– Wide input voltage range. low power consumption:
7V~36V,+12V/380mA@800mW;
– Small size:36*36*3mm
– Mounting holes 4-M3
– Lightweight: 7.2g(excluding antenna)
|
Additional Suggested Parts (Not Included):
Battery: 6S 1300mAh
Camera Mount for Gopro
Package Included:
1 x XL5 V5 Frame
1 x Caddx Ratel, 2.1mm lens camera
1 x Albatross RHCP SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
1 x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1 x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
Note: Camera Mount for Gopro is not included.
PRE-TUNED & PRE-SETUP:
– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on ‘Firmware/Factory Dumps’
– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
Please check our linked article on ‘How to disable Angle-Mode, activate Acro-Mode’
Reviews
There are no reviews yet.