After our popular TITAN DC5 (DeadCat style frame) approach we decided to take a step back to the roots and create a new X-Geometry frame to get the best performance on both axis and better weight distribution for freestyle.
HIGHLIGHTS:
– 6mm arm design for more durability
– XING 2208 motors for more power
– GPS pre-installed for more safety at distance
– Variable GoPro TPU mount (supports ND-Filter inserts)
– 360° TPU protection and Antenna mounts
Notice: The Camera Mount for Gopro is NOT Included in the pacakge.
PRE-TUNED & PRE-SETUP:
– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was appplied for a great flight experience!
– GPS-rescure mode is configured and just needs to be enabled in your Betaflight Configurator! (Please be aware of how it works before you use it!)
– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
– Motor Power is configured to 70% throttle limit (scaled) by default to give more throttle stick resolution for an easy start on the 6S 1800kv version. Need more Power? Just enable 100% in the Betaflight Configurator to unleash the Beast!
Specification:
Brand Name: iFlight
Model: TITAN XL5
Item Name: 250mm F7 6S FPV Racing Drone PNP/BNF
Wheelbase: 250mm
Optional Receiver: PNP(Without Receiver);
Frsky XM+ Receiver ( Built-in Frsky XM+ Receiver)
Frsky R-XSR Receiver ( Built-in Frsky R-XSR Receiver)
TBS Crossfire Nano Receiver ( Built-in TBS Crossfire Nano Receiver )
Recommend Battery: ( NOT Included)
TITAN XL5 250mm Frame |
Wheelbase: 250mm
Main body dimension: 185*133mm Weight: 145g
Bottom to top distance: 30mm
Arm thickness: 6mm
Bottom plate thickness: 2mm
Top plate thickness: 2mm
Camera plate thickness: 2mm (2.5mm included TPU inserts)
|
iFlight SucceX-E F4 & 45A Blheli_S 2-6S 4 In 1 ESC Stack 30.5×30.5mm
|
iFlight SucceX-E F4
MCU: STM32F405 IMU: MPU6000 OSD: AT7456E Blackbox: 8MB 4X Uarts(1 2 3 6) 8X Dshot/Proshot/Oneshot output 8X individual ESC power/ signal pads 1X Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX VTX protocol YES(IRC Tramp) WS2812 led Strip: YES Baro: No Beeper: YES PDB Specifications Input2-6S(Max 8S) 5V/2.5A cont Firmware : Target: STM32F405 FC: IFRC/IFF4_TWIN_G(STM32F405) Physical Mounting: 30.5*30.5mm, φ4mm with Grommets φ3mm Dimensions: 36*36mm Weight: 7.6g
45A Blheli_S 2-6S 4 In 1 ESC Dimension: 40*43mm
Mounting Holes: 30.5*30.5mm/Φ3mm Weight:14.4g Supports 2-6S Lipo input STM32F051 MCU, 48Mhz Runs BLHELI 32.X BLHeliSuite download:
Current sensor: No BEC: No Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. Target: G-H-30 BLS 16.7
|
XING 22081800KV 6S Motor |
Brand name: iFlight
Item name: XING X2208 Brushless Motor
KV: 1800KV
Stator Diamter: 22mm
Stator Length: 8mm
Shaft Diameter: 5mm
No.of Cells(Lipo): 3-6S
Weight: 37g
|
Nazgul 5140 3-Blade Propeller |
Brand Name: iFlight
Item Name: 5140 5 Inch Durable 3-Blades Propeller
Model: Nazgul 5140
Material: polycarbonate
Mounting: 5mm center hole
Weight of Single Prop: 4g
Quantity: 2 CW & 2 CCW
|
Features:
– 6mm arm design for more durability
– XING 2208 motors for more power
– Variable GoPro TPU mount (supports ND-Filter inserts)(Not Included)
– 360° TPU protection and Antenna mounts
Package Included:
– 1x TITAN XL5 Frame
– 1x Caddx Ratel Camera
– 1x iFlight FPV GPS Module
– 1x SUcceX-Force 5.8G VTX
– 2x TPU camera side plate soft mount
– 1x TPU lens cover
– 1x iFlight Lipo Strap
– 2x Nazgul 5140 Propeller (Set of 4 – Color May Vary)
– 4x XING 2208 1800KV Motor Unibell
– 1x iFlight SucceX-E F4
– 1x 45A Blheli_S 2-6S 4 In 1 ESC
– 2x MMCX to RP-SMA Female Adapter Cable
– 1x Optional Receiver
– 1x 3pin Cable
Reviews
There are no reviews yet.