Introduction:
The Caddx Polar Nano Starlight Camera Naked Vista Kit is a low-light camera with a 1/1.8′ digital starlight sensor and Caddx Vista Unit. This camera has low-latency HD image transmission video recorded through the DJI FPV Goggles. Perfect for your nano builds with its ultralight features… including the new 1.5g lightweight polar antenna which has a 98% efficiency rate and 2dbi average gain. This naked version comes without the heatsink casing attached, eliminating about 10g of weight making your build even lighter!
Note:
1. Naked vista has been activated and upgraded to the latest version, in order to avoid damage caused by upgrade failure.
So you don’t need to upgrade again.
2. Removal of the heat sink eliminates weight, but may cause overheating of the unit.
Please be cautious when flying and once your battery is connected, fly immediately. The airflow will keep the unit cool.
3. Be sure to dissipate heat and fly as soon as the power is turned on
If you have any questions, please contact Flywoo technical support as soon as possible. –?flywoofpv@outlook.com?
Features:
Naked version has heatsink casing removed, eliminating 10g of weight
Starlight camera is great for low-light flights
1/1.8 Inch HD Digital Starlight Sensor
Low-latency HD image transmission
Caddx Polar Nano Starlight Camera
2.7g Ultra-light Digital HD Camera
1/1.8 Inch 14x14mm 2.7g camera
Min. illumination: 0.OO0O3Lux
New 1.5g lightweight antenna
Small Camera – Big Sensor
Radiation efficiency: 98%
14mm nano-size camera
Naked Caddx Vista Unit
Work with DJI goggles
Caddx Polar Antenna
Description:
Model: Polar nano vista kit
Weight: Vista Kit(camera included): 22g
Antenna: 1.5g
Dimensions
Vista kit:30*29*13mm
Camera:14*14*15.8mm
Coaxial cable:80mm
Operating Frequency: 5.725-5.850GHz
Transmitter power(EIRP): FCC/SRRC:4km;CE: 0.7km
I/O Interface: USB-C;IPEX,3in1 port
Supported flight control system: F3.F4.F7
Operating temperature range:32° to 104°F(0° to 40°C)
Input power: 7.4-26.4V
Power Output: 25mW/200mW/500mW/700mW
Hardware included: Polar nano vista kit/m2 screw/bracket/3in1 cable/antenna
Googgles: Work with DJI goggles
Camera: Sensor 1/1.8′ inch starlight cmos Min.Illumination: 0.00003Lux
Lens: F/1.8
Shutter:Rolling shutter
ISO:100-25600
FOV: 162°?D?;138°?H?;75°?V?
Aspect Ratio:16:9
Specification:
Max. Transmission Distance FCC/SRRC: 4km;CE: 0.7km
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Transmitter Power: (EIRP) FCC/SRRC/MIC: <30dBm
Power Output: 29MW/200mMW/500mW/700mWwW
Weight of naked Vista Kit (camera included): 12g
Weight with camera and Heatsink casing: 22g
Min.latency (end-to-end): 720p 60fps: <32ms
Camera Sensor: 1/1.8 inch starlight CMOS
Supported Flight Control System: F3.F4.F7
Operating Frequency: 5./25-5.850GHZz
I/O Interface: USB-C,IPEX,3-in-1 port
Model: Caddx Polar Nano Vista kit
Camera Size: 14x14x15.8mm
Min. Illumination: 0.00003Lux
FOV: 162°(D);138°(H);75°(V)
Dimensions: 30x29x13mm
Shutter: Rolling shutter
Input Power 7 4-26.4V
Coaxial Cable: 80mm
Aspect Ratio: 16:9
ISO: 100-25600
Antenna: 1.59
CE: <14dBm
Lens: F/1.8
Package Included:
1x Polar nano vista kit
2x M2 screws 3/4/5mm
1x Caddx Polar Nano Starlight Camera
1x Naked Caddx Vista Unit ?without Ant?
1x 14mm-19mm bracket
2x M2 Screws 3/4/5mm
1x 3-in-1 Cable
Reviews
There are no reviews yet.