Feature:
This Pro controller is compatible with the Switch host and also supports Windows computers
No need to load any driver, the gamepad can be used after connecting with the Switch host
Wireless connection, strong anti-interference ability, stable connection signal
One-key connection mode, easy to operate
Built-in 600 mAh polymer lithium battery, it can be used continuously for about 8~10 hours after fully charged
The gamepad built-in gyroscope supports motion sensing function; built-in dual motors support dual shock function; supports burst function
Up to 4 wireless controllers can be connected to the host at the same time
In the case of charging the gamepad, you can also play the game normally
This gamepad can be upgraded with updated software by connecting to a computer
Working voltage: DC 3.7-4.2V
Working current: 20-30mA
Sleep current: 10-80uA
Vibration current: 80-150mA
USB input voltage/current: DC 5V/1200mA
Operating distance range: ≤8M
Battery voltage/capacity: 3.7V/1200mAh
Battery continuous use time after fully charged: about 20 hours
Charging time: 5-6 hours
Standby time: About 60 days
Gamepad net weight: 210g (235g including charging cable and manual)
Gamepad size: 155.5×107.5×63.5mm
Instruction:
Connect to the Switch host via wireless:
Connect the gamepad to the host for the first time: turn on the Switch host, in the main menu interface of the host, touch and click ‘gamepad‘ → ‘Change grip’ with your finger to enter the host pairing mode interface; on the gamepad, press and hold the ‘HOME’ button for 4 seconds Turn on the gamepad, the four LED lights will flash in a slow cycle at first, and then will flash in a fast cycle after 4 seconds, and enter the search state. When one (or more) LEDs are on, the gamepad is paired with the host successfully. Press the ‘B’ key to return to the main menu interface
Connect the gamepad to the host again: Short press the HOME button to turn on the gamepad, and the gamepad is automatically connected to the host
Gamepad back to host:
a. In the sleep state of the gamepad, short press the HOME button to wake up the gamepad, and the gamepad will automatically connect back to the host
b. In the host sleep state, first press the power button of the host to wake up the host, and then short press the home button of the gamepad to connect to the host (in the host sleep state, directly pressing any button on the gamepad cannot wake up the host)
Connect the Switch host via a USB cable:
On the main menu page of the Switch host, click Settings → gamepad and sensor → Pro gamepad wired connection to turn on the Pro handle wired communication function of the Switch host; connect the handle to the USB port of the Switch host base with a USB cable. LED4 flashes slowly; LED1 on the handle flashes slowly after connecting
Connect Windows computer via USB cable:
First, you need to download and install the X-360 driver to the Windows computer; then connect the gamepad to the computer with a USB cable, and the four LEDs on the gamepad flash slowly; after the handle driver is automatically installed, the corresponding LED on the gamepad flashes slowly, and the handle can be used . Support X-360 mode games. Please find the download method of X-360 driver on the Internet
Remarks: In X-360 mode with a wired connection to a computer, there is a vibration function but no motion sensing function
Package Included:
1 x Gamepad
1 x Charging Cable
1 x User Manual
Reviews
There are no reviews yet.