TSL-990AD Digital Display Pull-out Table Hot Air Table High Precision Hot Air Gun BGA Rework Station Hair Dryer
Ship From: China Warehouse
Dispatch: Ships within 1-3 business days
Estimated Delivery: Between
FREE SHIPPING & EASY RETURNS
Product Name: Digital Display Rework Station
Type: Digital Display Hot Air Gun
Working Temperature: 100-480C°
Air Flow: 0.3-24L min
Power Supply Type: AC Power Supply
Rated Voltage: 220
Rated Input power: 2700
Length: 187 (mm)
Height: 135 (mm)
Net Weight: 2 (KG)
Standard Accessories: host handle
Rated Voltage Range: AC Single-phase and DC 50V and Below
1. Install and power on:
- Open the package and take out the mainframe. Remove the red screw at the bottom of the body (- be sure to pay attention! )
- Turn on the 220V power supply to use. Turn on the power switch (POWER), the system can begin to work.
- Note: the first use of hot air suction tin demolition gun may be white smoke, a normal phenomenon.
2. Hot air hxad use:
- Power switch on, according to the need to choose a different wind nozzle and tin needle (has been equipped with accessories), and then the hot air temperature adjustment knob (HEATER).
- Adjust the hot air temperature knob (HEATER) to the appropriate temperature, and then adjust the hot air volume adjustment knob (AIRCAPACITY) to the required air volume, When the preheating temperature reaches the adjusted temperature, it can be used. If you don’t use it for a short time, you can adjust the hot air volume knob (AIRCAPACITY) to the minimum and the hot air temperature knob (HEATER) to the minimum.
- knob (HEATER) to the middle position, so that the heater in the insulation state, and then use, adjust the hot air volume knob, hot air temperature knob that can be.
- Note: For different packages of integrated circuits, replace the special air nozzle of different models. For different solder joint size, choose different temperature air volume and air the distance between the nozzle and the board.
3. The disassembly of the direct plug components:
- According to the above, so that the hot air part of the normal work, according to the size of the pad to replace the appropriate nozzle and suction tin needle (with accessories), heating can be.
- According to the different circuit board materials and different pads, choose the appropriate temperature and air volume. This method is suitable for a variety of single and double panels and a variety of different sizes the solder joints.
4. SMD components disassembly:
- Chip component disassembly: according to the different line substrate materials to select the appropriate temperature and air volume, so that the wind nozzle against the chip component pins, repeatedly and evenly uniform heating, to reach a variable temperature, with tweezers to slightly increase the force of its natural detachment from the substrate.
- SMD components of the soldering: in the location of the SMD components have been removed coated with a layer of flux, and then the solder tray leveling, with hot air to flux blowing evenly, alignment align the position, put the SMD components, with solder positioning. In the – – SMD components should be soldered place, all pile on the solder (pile tin method), and then according to above to remove the excess solder, with a soldering iron can be slightly shaped. With this method of soldering SMD components, beautiful joints, welding quickly and firmly, reliable.
1. In the hot air welding gun internal, equipped with overheating automatic protection switch, the gun nozzle overheating protection switch action, the machine stops working. Must be the air volume knob (ATPCAPACITY) to the maximum, delay about 2 minutes, the heater can work, the machine back to normal.
2. After use, pay attention to cooling the body: off, the heater will automatically spray cold air for a short period of time, in this cooling phase, not in the unplugged power plug head.
3. When not in use, please put the handle on the bracket to prevent accidents.
4. More detailed instructions for desoldering, please see the manual.
1 X Digital Display Rework Station
More Detailed Photos:
When you order from Alexnld.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order’s shipment. You can choose the preferred shipping method on the cart page during the checkout process. We offers 3 international shipping methods:
1. Airmail – Free untracked economy shipping via national postal services (HK Post, Singapore Post, China Post, PostNL, Swiss Post, Sweden Post, USPS, Royal Mail e.t.c.)
2. Airmail Registered – Tracked shipping via national postal services (HK Post, Singapore Post, China Post, PostNL, Swiss Post, Sweden Post, USPS, Royal Mail e.t.c.)
3. Expedited Shipping – Express shipping with courier delivery (DHL, UPS, FedEx, TNT)
|Airmail and Airmail Registered||Area||Estimated Delivery Time|
|United States, Canada||7-25 business days|
|Australia, New Zealand, Singapore, United Arab Emirates||10-25 business days|
|United Kingdom, France, Spain, Germany, Netherlands, Japan, Belgium, Denmark, Finland, Ireland, Norway, Portugal, Sweden, Switzerland||10-25 business days|
|Italy, Brazil, Russia, South Africa||10-45 business days|
|Other countries||10-35 business days|
|Expedited Shipping||3-10 business days to Worldwide|
We accept payment through PayPal，and via credit card.
Paying with PayPal / Credit Card -
NOTE: Your order will be shipped to your PayPal address. Ensure you have selected or entered the correct delivery address.
1) Login To Your Account or use Credit Card Express.
2) Enter your Card Details the order will be shipped to your PayPal address. and click Submit.
3) Your Payment will be processed and a receipt will be sent to your email inbox.
If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund within 15 days from delivery date. All returned items must be in new and unused condition, with all original tags and labels attached.
To return an item, please email our customer service at email@example.com to obtain a Return Merchandise Authorization (RMA) number. After receiving a RMA number, place the item securely in its original packaging, and mail your return to the following address:
HaGiborim St 8
Please note, you will be responsible for the return shipping charges. We strongly recommend that you use a trackable method to mail your return.
All customers should contact us and obtain Return Merchandise Authorization (RMA) number before sending anything to us. We will not be responsible for returned item(s) without notifying us in advance.
After receiving your return and inspecting the condition of your item, we will process your refund to the credit / debit card or PayPal account which was used to place the original order.
Please allow at least seven (7) days from the receipt of your item to process your refund. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your refund has been processed.
If an item is found damaged or defective on receipt, we kindly ask you to contact us within 15 days from the delivery date to arrange a refund or exchange without physical return of the item.
Please provide us with following:
1. Photos of the front and back sides of the packaging box;
2. A photo, video or screenshot of the defective item or the defective part of the parcel.
Our customer service team will communicate with you to arrange a refund or reshipment without physical return of the item.
Warranty & Repair service
If any of the items you have purchased from us is found defective within 1 year from receipt, you are entitled to a repair under warranty. Please kindly provide us with evidence photos or videos of the defective item. After providing such information to our Customer Service team and the problem is acknowledged, you can send the items back to us for a repair.
Note: Please be aware, we do not cover the cost of the returns fees in warranty & repair service.