Tip Please:
0-200V,0-10A,2000W
Product Description
|
— KPS series products are a newly developed and upgraded high-power digital display program-controlled switching DC regulated power supply.
–This product is a DC programmable power supply with exquisite appearance, small size, high performance, powerful functions and simple operation.
–It is suitable for testing in aerospace, consumer electronics, computers and peripherals, communications, semiconductors, solar energy and automotive electronics industries.
–The product can display voltage and current at the same time. Its output voltage and output current are adjusted by the encoder knob, which can be continuously adjusted between 0 and the nominal value. It has high power, large current, quik response, and fast load transient response. Low noise, easy to use and other significant advantages!
–The stability and ripple coefficient of the power supply are very good. It has various protection circuits such as short-circuit protection, over-voltage protection, over-current protection, and over-temperature protection. It can work at full load for a long time and is deeply loved by users.
|
Features
|
•Small size, light weight, suitable for work surface use and rack installation;
• Exquisite appearance, flexible operation and convenient use;
• High precision, internal use of original chips, stable and reliable performance;
•Using high-gain amplifier circuit design, with good fast load transient response, to prevent unwanted voltage offset;
• Using PWM modulation, high efficiency and more power saving;
•Intelligent temperature control fan, low noise;
• Built-in OVP over-voltage protection, OCP over-current protection, OPP over-load protection, OTP over-temperature protection, complete and reliable protection functions;
• Voltage and current preset, OUT output function;
• The product has a short-circuit protection alarm function;
|
Application field
|
Electrolytic plating
Product aging test
Production line test
Battery charging
Electronic device testing
Laboratory research and development test
School teaching experiment
Telecom Power
|
Work requirements
|
|
Input Voltage:AC 220V±10%;50Hz
|
Operating temperature:0℃~40℃;Relative humidity:<80%RH
|
Storage temperature:-10℃~70℃;Relative humidity:<70%RH
|
Output Power
|
0-Rated Power
|
Output Voltage
|
0-Rated Voltage
|
Output Current
|
Rated
|
Set value resolution
|
V:0.01V
|
C:0.01A
|
Resolution of readback value
|
V:0.01V
|
C:0.01A
|
Header display
|
|
0.56 inch white four-digit digital tube display
|
Display accuracy: 0.5%±3 Charatrer
|
Display resolution: voltage 0.01V, current 0.01A
|
Regulated state CV
|
|
Voltage stability:0.5%±20mV
|
Load stability:0.5%±20mV
|
Ripple voltage:≤0.5% Vp-p
|
Steady current state CC
|
|
Current stability:0.5%±20mA
|
Load stability:0.5%±20mA
|
Ripple current:≤0.5% Vp-p
|
Temperature Coefficient:≤100ppm/℃
|
Rise Time
|
No load≤15ms
|
Fully loaded≤30ms
|
Dynamic response time
|
≤2ms
|
Accessibility
|
OUTPUT output switch, OCP short circuit protection switch
|
Protective function
|
OVP over voltage protection, OCP over current protection, OPP, overload protection, OTP over temperature protection
|
Package included
|
|
AC power cord X1
|
Operation Manual X1
|
Certificate of conformity and warranty card X1
|
Wiring copper terminal X2
|
Size&Weight
|
335X260X130mm
8KG
|
Reviews
There are no reviews yet.