Model No. OP-GP05
Working temperature: -20℃-60℃
Input voltage: DC5-24V
Output channel: 3 channels
Max output current: ≤6A
Controller size: L61xW35xH22mm
Output power: 5V:≤30W, 12V≤72W, 24V:≤144W
Static Power: <1W
Connection mode: Common anode
Working voltage: 3V, 2*AAA batteries
External dimension: L124mm*W56*H7mm
Remote control distance: 8-10m
1. Install the control software APP-‘Tuya Smart’ on the mobile phone before use.
The installation methods are as follows:
1) Scan the following QR code to download and install the software APP;
2) Search for ‘Tuya Smart’ in Google Play Store (Android phones) or App Store (Apple phones) to download and install.
2. Download and install the software. After the installation is complete, turn on the mobile wifi and connect to the router.
3. Connect the load line to the controller part first, then connect to the power; make sure that there is no short circuit between the connecting lines before powering on.
4. Open the APP software ‘Tuya Smart’ on the mobile phone:
If you don’t have an account, you need to click ‘Create New Account’ to register an account; if you already have an account, you can log in and use your existing account directly. After registration, log in and enter the homepage ‘My Home’, click ‘Add Device’ or the ‘+’ sign in the upper right corner to add a device, select the ‘Lighting’ line item in the Manual Add column, and select ‘Lighting (Wi-Fi)’, Enter the ‘Add Device’ page;
5. Please put the WIFI device into the network configuration state:
Operation method: make sure power off the WIFI controller in the power-on state first, and then start to operate five steps: power on-power off (the first time),
Power on-power off (the second time), power on-power off (3rd time), power on-power off (4th time), power on (5th time), after you finish this step;
There is no need to cut off the power, the light will flash quickly and enter the network distribution state;
Note: The first to fourth power-off operations need to be power-off within 5 seconds after power-on)
6. Select the wifi routing network, enter the router password and click ‘Next’ —-> select ‘Indicator flashes quickly for 0.5 seconds/time’ —-> APP will prompt ‘device added successfully’, wait for the controller to connect successfully , The output light will stop flashing quickly. The interface of adding equipment successfully can customize the naming and setting of the controller, and assign the controller to 6 places such as the living room and the master bedroom.
7. After adding the equipment, enter the lighting control interface, there are four options of ‘white light mode’, ‘color light mode’, ‘scene mode’ and ‘timing’ to control the lighting.
The same control, the middle light bulb icon in any mode is the switch function. The function description of each option is as follows:
① Color light mode: Touch the color ring to select any color, and adjust the ‘saturation’ and ‘brightness’ of the color light from 0-100% through the two horizontal bars below.
② Scene modes: A total of 8 modes, the top 4 are static color scene modes, and the bottom 4 are dynamic scene modes. All eight scenes can be ‘set’ and ‘edited’.
③Timing: The timing switch state of the lamps can be set according to actual needs. Note: After setting the timing, the mobile APP exits and disconnects the wifi, and the timing also works.
④ Music: Enter this function, when the mobile phone is playing music, the light will jump and change to different modes and colors.
8. Scene mode setting: return to the homepage and select the ‘smart’ column, you can add scenes to control multiple controllers or devices.
9. Voice service: The controller is compatible with smart voice devices such as Alexa, Google Assistant, Rokid, Tmall Genie, Dingdong, Tencent Xiaowei, etc. It may be easy to operate the lights by connecting smart voice devices. For specific connection methods and instructions, please click the corresponding The service operates.
1*Smart APP RGB LED Controller
1*40Keys Remote Control
More Detailed Photos: