Description:
XKC-C350-2P high and low level controller and XKC-Y25-V three liquid level detection heads realize liquid level high and low control and motor idling protection function: when the container liquid level is too low, it will trigger the low liquid level alarm signal sent by the low liquid level sensor Trigger the C350 controller to close the relay to start the water pump to add liquid level. When the liquid level reaches a certain height, the high liquid level sensor sends a signal to trigger the C350 controller to open the relay and automatically stop the water pump. Thereby, the function of automatic control of the container liquid level is realized, and the container liquid level is kept stable. The idling protection function of the water pump is also added. When there is no water at the water inlet, the water pump will be automatically disconnected for 3-5 minutes to protect the water pump.
Function introduction:
1. Automatic water level control: when the water level is lower than the sensing probe, the water pump will be started automatically, when the water level rises high, the water pump will be shut down automatically
2. Pumping overtime protection: when the continuous automatic pumping exceeds 5 hours, the pump will stop automatically. The working indicator light flashes quickly, and it can be stopped by pressing the K2 key, or it can automatically delay to resume standby.
3. Manual and automatic switching: the controller will enter the automatic working mode by default when it is turned on. Press K1 swordsman to switch the working mode. The red light will be on for automatic mode and the red light will be off for manual mode.
4. Non contact induction probe: it adopts non-contact capacitance induction technology and special induction control chip design. The probe is durable, anti-interference, strong, sensitive, non-contact with liquid, anti-corrosion, safety and environmental protection pollution .
Features:
1. AC95-265V wide voltage power supply
2. Relay dry node output, can adapt to a variety of load control
3. The control is diversified, and the water pump can be controlled manually or automatically
4. The installation is simple and convenient. It can be installed by screw positioning or electric box track
Technical parameter:
Name: C350 high and low liquid level automatic controller
Model: XKC-C350-2P
Material: polymer
Output model category: switch sensor
Applicable scenario: liquid level controller
Sensor category: liquid level sensor
Working voltage: 220V
Input voltage: AC100V-220V, 50 / 60Hz
Working voltage: DC12V
Working current: working current <110mA, static power consumption <20mA
Load power: less than 1.6kw (overload or three-phase water pump needs to be equipped with AC contactor)
Alarm output: 800W (resistive load) normally open and normally closed output
Output mode: relay normally open, normally closed or AC 110V / 220V, one out of two
Input signal:
Low level induction signal input
High level induction signal input
Sensor interface voltage: DC12V
Operating temperature:-10℃ ~ 75 ℃
Measurement accuracy: 0.5MM
Package included:
1 x water level controller with 2 Non Contact Sensor Module
Reviews
There are no reviews yet.