XY-WPCL is a Wireless WIFI PC Remote Switch Controller.It can remotely control the switch of the PC through WIFI, which can effectively solve the blue screen, crash, and restart.More functions can also be set via APP, such as scheduled boot.
1>.Remote intelligent control anytime, anywhere
4>.Support Power on automatically
5>.Lock the host button
6>.Supports status tracking, home appliances status timely feedback to App
7>.Support share control
8>.Easy installation, easy handling and can be activated immediately and stably
9>.APP supports multiple languages
Control Type:APP Sinilink Control
WIFI standard:2.4GHz b/g/n
Working Temperature range:-40℃~85℃
Working Humidity Range:5%-95%RH
1>.Set power-on default state.
2>.Enable/disable PC host button.
3>.Real-time monitoring of PC status.
4>.Manual remote boot.
5>.Manual remote shutdown.
8>.Device sharing control.
9>.Set timing power on/off time.
10>.Set delay time.
11>.Set auto power on/off time.
12>.Enable/disable email notification function.
13>.View operation records.
14>.Modify device name.
1>.Remove PC power.
2>.Find ‘POWER SW’ on PC host board.
3>.Pull out the plug after remembering its location.
4>.Connect DupontWire to ‘POWER SW’.
5>.The another end of DupontWire connect to P-SW pins on XY-WPCL.
6>.The ‘POWER SW’ terminals which remove from PC connect to P-KEY on XY-WPCL. User can use the wire inside the package to extend, if the original wire is very short.
7>.Find ‘POWER LED’ on PC host board and pull out the plug after remembering its location.Then connect DupontWire to ‘POWER LED’.
8>.The another end of DupontWire connect to P-LED1 and P-LED2 pins on XY-WPCL.
9>.The ‘POWER LED’ terminals which remove from PC connect to another P-LED1 and P-LED2 pins on XY-WPCL. User can use the wire inside the package to extend, if the original wire is very short.
10>.Keep press ’ SET ’ button 5 second enter into Touch WIFI pairing mode at running status. Touch pairing mode: Blue LED indicator flashes 4 times every 1 second interval.
11>.Enter Touch WIFI pairing mode by default after power ON.
12>.Open APP Sinilink and register an account.
13>.Select and click ‘Touch’
14>.Input your WIFI password and then next. Note: It just can support 2.4GHz WIFI signal but not support 5GHz WIFI. The module should be placed near the router and phone need connect WIFI from this router.
15>.Set device information and then connect.
16>.Pairing successful.(Please refer to the detailed operation schematic picture below)
1>.Computer remote control
4>.Hatching aquaculture control
1>.Put XY-WPCL,Router and phone together as much as possible when paring for WIFI clock.Phone must connect WIFI this router when paring.
2>.At first time when pairing,phone must be connected to WIFI from router.It is not need connect to WIFI after pairing success.
3>.It must be successfully paired with WIFI before it can work normally.
4>.Please read use manual and description before use.
1 x XY-WPCL Wireless WIFI PC Remote Switch Controller
1 x USB-DC005 Power Wire
1 x 30cm XH2.54-4P Female to Male Wire
1 x 30cm XH2.54-4P Male to Male Wire
More Detailed Photos: