Description:
1. Under non-settings, press the SET key, and the cycle display: working mode-> lower limit voltage-> upper limit voltage.
2. Under the non-settings state, the Changan SET key is 2 seconds to enter the parameter settings state; the display display F01, press+-key to select the parameters to be set, F01 (upper limit voltage), F02 (lower limit voltage), F03 working mode, F03 working mode, F03 working mode, F03 working mode, F03 working mode, F03 working mode, and F03 working mode, F03 working mode, F03 working mode, and F03 working mode, F03 working mode, and F03 working mode, F03 working mode, and F03 working mode, F03 working mode, and F03 working mode, F03 working mode, and F03 working mode, and F03 working mode, F03 working mode, and F03 working mode, F03 working mode. F04 voltage school accuracy.
3. After selecting the parameters that need to be set, press the SET key to enter the parameter setting state, and adjust the+-key. When the current limit voltage is greater than or equal to the upper limit voltage, the display displays the ERR for 1 second, prompting the user. When the current limit voltage is equal to the upper limit voltage, the relay output function is turned off.
4. After setting the parameter value, press the SET key to return the parameter list.
5. After the parameters are set, press the SET for 2 seconds to quit and save the parameters.
6. In the non -setting state, press the SET and+key for 2 seconds at the same time to restore the factory settings.
7 Long press -Close or open the digital tube to display energy -saving mode
Detailed explanation:
F03 working mode non -setting status
Press SET to select the F03 work mode to select,+and-to select the required features and press the set to save exit
You need to pay attention to setting this parameter, please set the upper limit voltage and lower limit voltage.
H-1, charging monitoring When the monitoring voltage is lower than the lower-limit voltage relay suction, it is higher than the upper limit voltage.
H-2, discharge monitoring When the monitoring voltage is higher than the upper-limit voltage relay suction, it is lower than the lower limit voltage.
The H-3 range is performed. When the monitoring voltage is in the upper limit voltage, the relay is disconnected when the lower limit voltage, and other state relay suction
Inhalery in the H-4 interval When the monitoring voltage is in the upper limit voltage, the relay suction combined between the lower limit voltage, the other state relay is disconnected
H-5 fixed-point monitoring.
H-6 fixed-point self-lock monitoring When the monitoring voltage is higher than the lower-limit voltage relay suction, it always maintains suction and combined until manual intervention or power off
H-7 fixed-point pulse monitor
F04 Correct Mode Non-Set State Press the SET key to enter,+-select
The default is 0 error. If you need to set the need to adjust,
For example, the actual input voltage is 12.5V, and the module displays 12.4V. At this time, you can modify the error set here to 0.1V, 12.4+0.1 = 12.5
For example, the actual input voltage is 12.5V, and the module displays 12.6V. At this time, you can modify the error here to 0.1V, 12.6-0.1 = 12.5
Package Include:
1x Module Board
Reviews
There are no reviews yet.