Specification:
Input voltage
|
Charger 5V 2A
|
Working current
|
1-5A
|
Maximum current
|
<5A
|
No-load current
|
<2A
|
Power
|
50W
|
Battery capacity
|
6500mAh 11.1V
|
Emergency lighting
|
80h
|
Working temperature
|
-10℃-35℃
|
Charging method
|
Type-C
|
Chargin time
|
About 3-4h
|
Reachable pressure
|
140PSI(5bar/5kg/500kpa)
|
Size
|
150x70x40mm
|
Features:
【Automatic Electric Ball Pump】Pumteck Electric Ball Pump designs with intelligent pressure detection and stop function,just preset the correct ball PSI,press to start and it will automatically stop inflating once the preset pressure is reached. Smart and easy to use.
【Accurate Pressure Alignment】 built-in Digital Pressure Gauge and LCD Display, you can preset a very accurate PSI to inflate your ball ,and then you could get an accurate level of pressure (PSI) in balls. Makes inflating balls much easier without wasting time, you can focus, not on the ball but, on the game
【Fast Ball Pump-Free Your Hands and Save Your Energy】Air volume input: 4L/M, which finishes inflation of a ball in just 1-2 minutes. No need to be sweating for pushing or pulling those manual ball pumps with your hands. Saving more energy to beat your opponent
【Portable Compact Design】Size: 150x70x40mm, Weight: 550g, fit to in your bag, your boot or even your pocket. Allows you to take this mini pump to wherever you might need it to keep your balls inflated.With bright LED lights and backlight LCD display make it convenient to use the ball pump at night or in dark places.
【High-capacity Battery】Electric ball pump with 6500mAh lithium battery, come with Micro-USB charging cable, about 3-4h to full charged.
Instructions for use:
I. Please charge the machine before using it for the first time. When the power of the display screen is 100, the charging is over. The normal charging time is the first time after charging for 3- 4 hours.
2. Connect one side of the tire inflation joint to the air pump and the other side to the tire valve core, then press the reverse button. Please notice the importance of the order of the connections; at the
same time, Please pay attention that there are two types of pipe joints, American and French. The joint of the trachea itself is American, and the independent French joint is screwed to the American
joint.
3. When the power button is pressed, the LCD screen starts to display. Press Inflation mode selection button again to start the conversion between the four units of PSI, BAR, . Select the unit you want, set the button to set the air pressure Ivalue you need, and finally press the power button.
4. Press the power on button to see that the LCD screen is fully on, and then go to the battery power icon. Then press the No. 5 button to enter the mode selection and switch to psi. You can set the value freely. After setting, short press the No. 2 key to start the air pump. Continue to press key 5, you can choose to switch between psi, bar and inflatable items, select the mode you want, and then press the start button to start inflation. When the inflation pressure reaches the pressure value you
set, the air pump will stop inflation immediately. If there is no need to set the air pressure value, press the start button to inflate the air directly, and then press the start button to stop when the air
pressure is satisfied.
5. Press the power switch, when the inflation pressure reaches the pressure value you set, the smart air pump will automatically stop the inflation work immediately.
WARNING:
1. Children are forbidden from this pump! Please keep it out of children ‘s reach! Never put the trachea in the mouth, eyes or ears of an alive animal . Please do not use the pump as a toy!
2. Please do not use this pump in somewhere close to flammable or explosive liquids and gases (eg gas stations)!
3. Do not leave when the inflation is in progress. The machine must be allowed to rest for 5-10 minutes after 10minutes of continue using.
4. When there is abnormal noise or excessive temperature during inflation, please shut it down immediately, allowing it to cool down for at least 15 minutes. Please be careful when disassemble
the trachea while. Its too hot and might be hurtful.
5. The product is not waterproof.
6. If the pump has been unused for a long time, it must be stored in a dry and closed place. If you have stored it for a long time, it is recommended to charge the battery once every three months.
7. Before using the rechargeable air pump, please make sure it has enough electricity. For the first time using air pump, charge it for 3-4 hours. After it recharged, the charging indicator will be shown as fully charged.
Package included:
1 x BIKIGHT Electric Pump
1 x Inflation Tubing
1 x Swim Ring Valve
1 x Manual
2 x Inflatable Adapter
Reviews
There are no reviews yet.