Description:
Widely used in remote control switches, remote control water pump opening and closing, remote control machine opening and closing, remote control motor forward and reverse, remote control socket, remote control LED, remote control audio, remote control electric door, remote control garage door, remote control retractable door, remote control Rolling shutters, remote control curtains, alarm hosts, alarms, remote control motorcycles, remote control electric cars, remote control MP3, remote control lights, remote control cars, security and other civil and industrial supporting remote control fields, have the advantages of simple supporting, safe and reliable use, and are suitable for the general public The choice for refitting products!
The receiver is powered by 12V or 24V, and the default is two independent relay signal output (that is, without voltage output). The output terminals have a normally open terminal, a normally closed terminal, and a common terminal (both without voltage). This switch can generally be applied to the following two occasions.
1. With 12V or 24V voltage output, this kind of equipment only needs to draw a positive wire from the input end to the common end and then share the negative wire of the input to directly control the 12V or 24 device.
2. Directly connect the normally open end and common end of the output end to other voltage circuits to control its on and off! (The recommended control voltage range is: 3V-250V, current range: 0.1A-10A resistive load)
Product parameters:
Product name: 12V 24V two-way remote control switch
Working voltage: DC12V /DC24V (option)
Working frequency: 315MHZ/433MHZ (default 315MHZ)
Working mode: jog M4/self-locking T4/lock
Code matching method Intelligent learning type
Working environment: -40℃~+80℃
Receiving sensitivity: 2-105dBm
Output current: inductive 3.5A: resistive ≤6A
Dimensions: outer shell: 75 x 55 x 30mm; inner panel: 69 x 49 x 18mm
Working status description:
The receiver has the following 3 working modes can be set, two-way jog, two-way self-locking, and two-way interlock. <You can change the working mode according to your needs, but remember that you must turn off the power when changing the working mode. Under the circumstances!
1. Jogging: insert the black jumper on the receiver on the 2+3 pins to jog. There is a mark M< on the board. Literal translation: press and hold the button on the remote control to work, and release it to stop. !>
2. Self-locking: insert the black jumper on the receiver into the two pins 1+2 to be self-locking. There is a mark T< on the board. Literal translation: the receiver is turned on and off on the remote control. Finish on the same button, press the remote control buttons in turn, the first button is on, the second button is off, the third button is on, the fourth button is off, and so on!>
3. Interlock: Leave the three black jumper caps 1, 2, and 3 on the receiver vacant as interlock. There is a mark OPEN=L< on the board. Literal translation: Press the A button on the remote control to open and B to close Or the A key is off and the B key is on. If the remote control has multiple buttons, it will learn which button is on, and all other buttons are off!>
Add or delete the instructions for using the remote control:
1. Learning: Press the learning button on the receiving board, release it after the green light turns on, immediately press any key on the remote control (such as the A key), and then immediately press another key on the remote control (such as the B key) and the green light flashes. After it goes off, it means that the remote control has finished learning. (Note: This two-way board is a multi-function learning type. The remote control must be learned separately with two buttons to enable the corresponding two relays on each control board. If the learning error occurs, you can clear the code and try again.
2. The 2262, 2260, 1527 chip equivalent frequency fixed code learning code wireless remote control that can learn more than 20 different address codes;
3. Clear code: long press the learning button on the receiving board for more than 5 seconds, the green light turns from bright to flashing and then goes out, indicating that the clear code is successful.
Package included:
1 x Wireless Remote Control Switch Module with shell
NOTE: The product are not included the Remote Controller.
Reviews
There are no reviews yet.