DIY Wi-Fi Wireless Remote Control Switch With 433MHZ Remote Controller For Smart Home
APP Download:
Adnroid APP:
Support apple cellphone also, you can search "易微联" in App store to setup it;
Support apple cellphone also, you can search "e-welink" in App store to setup it for English version;
Usage:
Sonoff and Slampher are smart WiFi Wireless products which will connect with your home appliances and lights by Wi-Fi, allowing you to remotely turn devices on or off, set timing schedules, check devices status through the APP in your smart phone.Slampher can connect to light bulbs with E27 screw base while Sonoff can connect to various home appliances.
How do Sonoff and Slampher work?
Sonoff and Slampher will send data to cloud platform through Wi-Fi Router, they pair with the Wi-Fi through the APP, thus you can control all added appliances and lights with your smart phone or tablet. The 433 Mhz receiver inside Sonoff and Slampher supports 433 Mhz devices indoor control.
As long as the phone has network(2G/3G/WiFi), you can remotely control all your devices. The APP supports:
– Checking all devices status
– Remotely turn on or off the devices
– Setting maximum 8 timing schedules
How to operate the APP?
– Register and log in
– Add devices(auto-search devices to be configured —select the device to be added—select the wifi to be paired with—configure)
– Control devices(remote turn on/off, set timing schedules, check status, share devices)
You can control your Sonoff and Slampher by 2 ways by the manual switch, by the APP. No matter which way you use, the status are synchronous.
How to install Sonoff and Slampher? To install Slampher, simply switch off the electricity source, screw the light bulb of E27 screw base into Slampher, then screw the Slampher into your original E27 screw light holder.
To install Sonoff, pay attention to the IN and Out mark on Sonoff.
1. Switch off electricity source.
2. Open the two yellow shells at both ends.
3. Connect the two electricity source cables(Live and Neutral) to the 2 ports with “IN” mark, one cable for one port and there’s no limitation for which port to connect.
4. Connect the two appliance cables(Live and Neutral) to the 2 ports with “OUT” mark, one cable for one port and there’s no limitation for which port to connect.
5. Cover the shells and screw firmly.
Amazon AWS Global Server
All our smart home products use Amazon AWS Global Server, which is very stable and easy to access. As long as your smart phone has 2G/3G/WiFi network, you can control all your home appliances in your palm from anywhere at any time.
Description of DIY Wi-Fi Wireless Remote Control Switch:
Power: <=0.5W
Rate Voltage: AC 90-250V
Power Adapter: Without Power Adapter
Other Features: Control mode: Mobile APP;
Transmission mode: Wi-Fi communication;
Controlled lines: 1;
Control distance: infinity;
Power: 7A / 1500W;
Platform: Android, iOS;
Working temperature: 0-55 degree
Description of 433MHZ remote controller:
With Battery
Operation Frequency: 433MHz
Operation Chips: 1527
Package included:
1 x Remote Switch Module
1 x 433MHZ Remote Controller
Reviews
There are no reviews yet.