HONCAM 8952 bluetooth Wireless Gamepad for PS4 PS4 Game Console Touchpad Dual Motor Vibration Game Controller for PC

Features:

This handle is compatible with P4 and P3 game console

Connect to the for PS4 game console via wireless, free of a drive. The signal is stable within 8 meters, with no delay, no disconnection, and strong anti-interference

Built-in 600 mAh rechargeable lithium battery, the handle has a charging display and low voltage display functions.

Built-in RGB LED lights, through the color light bar to indicate the player’s handle channel, different gamepads are indicated by different colors

Built-in left and right asymmetric motors, support dual motors and dual vibration functions; with burst and clear functions.

The handle supports touch panel and panel button functions

Built-in 3D acceleration sensor and G gyroscope sensor, with six-axis sensing function

Equipped with a speaker and 3.5mm headphone jack, the audio signal of the game can be output through the speaker and headphone of the gamepad

Without any operation, the handle will enter the dormant state in about 5 minutes, and the handle indicator will go out

This gamepad can be upgraded by connecting the Windows computer with a USB cable through the upgrade software

Introduction To Buttons:

HOME key: short press HOME key: display the main screen. Double-press the HOME button twice: Switch to the starting application. Long press the HOME button: end the application, log out/turn off the power of the host, and display the operable items according to the current status.

Four function buttons: Control the actions of characters in the game.

Arrow keys: Direction options in the game, to select up, down, left, and right.

Left and right 3D joystick: Control the movement of characters in the game or the direction control of the entire game screen.

‘SHARE’ sharing button and ‘OPTIONS’ option button: when connecting to P4 host, they are sharing and option buttons respectively.

TURBO and CLEAR keys: support burst and clear functions.

Remarks: According to different games, the functions of the controller buttons in the game will be different, subject to the actual operation in the game; this controller does not have the function of waking up the host.

Online Instructions:

1. Connect to P4 host

1) Connect to the P4 host for the first time: start the P4 host, after the host enters the interface, insert one end of the data cable into the USB port of the host, plug the other end of the USB cable into the handle, and then short press the HOME button of the handle, the LED of the handle The light will flash quickly. When the single color of the LED on the handle is always on, it means the connection is successful. Then unplug the data cable, and the handle will automatically connect back to the host.

2) Connect the handle to the P4 host again: short press the HOME button of the handle, and the handle will automatically connect to the host.

3) Connect to the P3 host: Use a USB cable to connect to the P3 host through a wired connection. When it is connected to the P3 host, the I-axis function and the vibration function.

Remarks:

1) The color LED on the handle indicates the status. Description: Display the player status. Press the HOME button, the LED light bar will light up in the order of blue, red, green, and pink, and configure each controller to identify the player’s login sequences.

2) Up to four wireless controllers can be connected to the host at the same time (up to two wired controllers can be connected to the host at the same time). The number of wireless devices that can be connected at the same time varies from device to device.

3) When the handle and the host cannot be paired, it means that the number of wireless devices connected to the host has exceeded the maximum. Please delete the unnecessary devices from the list of paired devices. (On the P4 host, select ‘Settings’> ‘Peripheral Devices’> ‘Wireless Devices’, select the device you want to delete, press the ‘OPTIONS’ button, and then select ‘Delete Device’. You can follow the instructions on the screen. )

Low Battery and Charging Instructions:

Low battery indication: When the battery voltage of the handle is above 3.6V, the handle indicator light is always on; when the battery voltage is at a low voltage of 3.3-3.6V, the handle indicator light flashes quickly at a frequency of 2.5Hz; when the voltage is lower than 3.3V, the handle enters the Sleep state.

Charging instructions: When the handle is connected to the P4 host via wireless, plug in the USB charging cable, and the handle LED will slowly flash at a frequency of 0.5 Hz; when the charger is connected to the charging state, the orange light will show gradually brighter/decrease, indicating Charging is in progress, charging is complete, and the indicator light is off.

Package Included:  

1 x Gamepad

1 x Data Cable

1 x User Manual