Description:
The Timer Camera F is a fisheye camera module based on ESP32-D0WDQ6-V3 with 8M PSRAM and 4M Flash on board. 3.0 megapixel camera (OV3660) with a 120° viewing angle and a maximum resolution of 1600 x 1200 photos can be captured. The camera features an ultra-low-power design, and the internal integrated RTC (BM8563) draws out the IRQ signal, which can be used for sleep and timer wake-up (sleep current down to 2μA). The built-in 270mAh battery provides more than one month of battery life with timed pictures (one per hour) enabled. The module supports WiFi image transfer and USB port debugging, and the HY2.0-4P output on the bottom can be used to expand other peripherals. The on-board LED status indicator and reset button facilitate program development and debugging. In terms of application, M5Stack provides a number of simple and efficient application development methods and interfaces for the TimerCAM series, making it easy for users to use and develop their applications. (including PC/Mobile photo shooting APP, cloud image HTTP interface for timer shooting, cloud AI recognition interface (not online yet), etc.)
The low-power power management solution adopted by the Timer Camera series is different from the CORE and StickC devices. When in use, the PWR button is used as a power-on button(long press 2s). If you need to shut down the device, you need to use the software API or press the Reset button on the PCB.
Features:
Design based on esp32
WiFi image transmission
Timed sleep wake up
Status indicator
Ultra low power design
Built-in 270mAh battery
Programming platform: ESP-IDF/Arduin/UIFlow
Package Included:
1x Timer Camera F
1x LEiGO Adapter
1x Wall-1515
1x Type-C USB(20cm)
Applications:
Take pictures regularly
Remote video monitoring
Specification:
Resources |
Parameter |
PSRAM |
8MB |
Flash |
4M |
Battery |
270mAh |
Image Sensor |
OV3660 |
Maximum resolution |
300w pixels |
Output format |
8-/10-Bit RAW, RGB and YCbCr output, compression. |
Maximum image transmission rate |
2040×1536: 15fps / 1080p: 20fps / 720p: 45fps / XGA(1024×768) : 45fps / VGA(640×480) : 60fps / QVGA(320×240) : 120fps |
FOV |
120° |
Net weight |
21g |
Gross weight |
44g |
Product Size |
48*24*22.6mm |
Package Size |
75*45*30mm |
EasyLoader:
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host , M5StickC/V/T/ATOM series can be used without driver)
PinMap:
Camera Interface PinMap
Interface |
Camera Pin |
TimerCamera |
SCCB Clock |
SIOC |
IO23 |
SCCB Data |
SIOD |
IO25 |
System Clock |
XCLK |
IO27 |
Vertical Sync |
VSYNC |
IO22 |
Horizontal Reference |
HREF |
IO26 |
Pixel Clock |
PCLK |
IO21 |
Pixel Data Bit 0 |
D0 |
IO32 |
Pixel Data Bit 1 |
D1 |
IO35 |
Pixel Data Bit 2 |
D2 |
IO34 |
Pixel Data Bit 3 |
D3 |
IO5 |
Pixel Data Bit 4 |
D4 |
IO39 |
Pixel Data Bit 5 |
D5 |
IO18 |
Pixel Data Bit 6 |
D6 |
IO36 |
Pixel Data Bit 7 |
D7 |
IO19 |
Camera Reset |
RESET |
IO15 |
Camera Power Down |
PWDN |
-1 |
Power Supply 3.3V |
3V3 |
3V3 |
Ground |
GND |
GND |
GROVE Interface
Grove |
TimerCamera |
SCL |
IO13 |
SDA |
IO4 |
5V |
5V |
GND |
GND |
LED Interface
LED |
TimerCamera |
LED_Pin |
IO2 |
BAT Interface
BAT |
TimerCamera |
BAT_ADC_Pin |
IO33 |
Related Link:
*datasheet
Example
*Arduin
*Source code
*Firmware
You can download and burn firmware with
Tutorial:
to take pictures
to get pictures
development
Reviews
There are no reviews yet.