Mini ELM327 iCar iV350 OBD2 OBDII Bluetooth Adapter Scanner for Android ISO PC
Features:
Fully compatible with ELM327 V1.4b.
Any supporting ELM327 software is available to use.
Faster than ELM327. ELM327 is RISC 8bit 44MHz MCU, iV350 is ARM 16bit MCU.
Due to the android diagnostic software becomes heavier to run, suggest to use on smart phone with CPU 800Mhz or higher, 1GHz recommended.
Built in power switch.
Low standby power consumption sleep mode.
Meet Bluetooth 2.0 spec.
Function:
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL ("Check Engine" light)
3.Display current sensor data, including:
4.Engine RPM
5.Calculated Load Value
6.Coolant Temperature
7.Fuel System Status
8.Vehicle Speed
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
12.Timing Advance
13.Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17.Fuel System status
18.Fuel Pressure
19.Many others…
Specifications:
switch power-saving mode
High speed Read data
Real J1939 protocol for heavy-duty vehicle
iCar Bluetooth
OBDII decode chip: ARM 16bit MCU
Firmware: ELM327 Version 1.4b compatible
Transfer baud rate: 4800 / 9600 / 10400 / 38400 / 500K
Input interface: OBDII male 16pin
Output interface: Bluetooth 2.0 Class 2
Indicator LED: Power / OBD / Link(PC or smart phone)
Operating Voltage: 12V, including over voltage /shortage protection
Nominal Idle current: 45mA
Color:White
Net Weight: 32g
Gross Weight: 70g
Power: supplied by car OBD socket
Communication Protocol
OBDII 16-pin DLC definition:
1. n/a
2. Bus + (SAE J1850 PWM, VPW)
3. n/a
4. Battery –
5. Signal –
6. CAN High (ISO 15765-4)
7. K Line (ISO 9141-2, SAE J2234)
8. n/a
9. n/a
10. Bus – (SAE J1850 PWM, VPW)
11. n/a
12. n/a
13. n/a
14. CAN Low (ISO 15765-4)
15. L line (ISO 9141-2, ISO 14230-4)
16. Battery +
Only pins 2, 4, 5, 6, 7, 10, 14, 15, 16 defined by above standards read data.Other customized pins are not supported.Please confirm OBDII label located under front engine hood.
Support OBDII/EOBD2 protocols:iCar obdII scantool is a high-quality automotive scanning tool, contact bluetooth 2.0 supports following OBD-II protocols :
0.Automatic
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
A.SAE J1939 CAN(29bit ID,250*Kbaud)
B.USER1 CAN(11*bit ID,125*Kbaud)
C.USER2 CAN(11*bit ID,50*kbaud)
Default settings(user adjustable)
1.Works with all OBD-II compliant vehicles
2.Wireless (Bluetooth) 5~10 meter
3.Software included for Palm, PDA,Mobile(Andrews,java,blackmerry,etc)
4.Software included for Windows PC
5.Software included for Windows Smartphone
Package Included:
1 X Bluetooth iCAR Adaptor
Reviews
There are no reviews yet.