Description:
Manual switch method:
1. Long press the power button for 2 seconds and do not let go to start the machine, long press the power button for 2 seconds to start the machine
2. The key to turn it off. If you do not manually shut down after starting the machine, it will automatically shut down if you do not use it for 5 minutes.
Features:
Function description details:
1. Can spot weld 0.1-0.2mm nickel plated sheet, pure nickel sheet (0.2mm thickness requires full charge spot welding when the tap position is set to the maximum), because the 0.2mm thickness has a high demand on electricity, try to make use the thickness below 0.2mm to ensure the consistency of the welding points. Attention! Cannot be used for soft packages.
The nickel transfer welding of the battery, that needs ultrasonic welding machine. Welding thickness selection is recommended material below 0.15mm, different materials. The top weld has different effects. According to the actual situation, use select thickness.
2. Automatic trigger function, welding without extra button trigger, as long as the spot welding pen pressure from Dynamic trigger welding, very convenient to use.
3. Five gears can be adjusted, the first gear bright green indicator light, the second gear bright purple indicator light, bright white indicator in gear 3, bright blue indicator in gear 4 and bright red indicator in gear 5. In the lamp. The green light in the first gear is the least powerful, while the red light in the fifth gear is the most powerful.
4. It can act as a battery pack. Considering that many users only need to purchase once or twice and have very short free time, we designed the function of charging bank here. We’ve thought about everything you want. You gotta like it! When charging, the maximum output is 5v2. 4A for mobile phone charging and 5V power supply for electrical equipment. The maximum input charging current is 2.4A, and the spot welder will be fully charged for about 2 hours. There are two kinds of charging interface: micro interface and C interface. The design is very human. You don’t have to worry about mismatching wires.
5. Gear memory function. The gear has memory function. After setting the gear, even if it is turned off or there is no power, the last set gear will be remembered when it is turned on again. There is no need to reset the gear.
6. Power indicator function, four power indicator lights, respectively 25% 50% 75% 100%. When the four indicators are all on, the power is 75% – 100%, and the full power is 100%
7. Low power automatic shutdown function, when the battery is low, it will shut down in advance to protect the battery. During spot welding, when the power is insufficient, the buzzer will prompt 2 times, and the yellow indicator light will flash at the same time, and then the machine will shut down automatically. At this time, please use it after it is fully charged.
8. Low power consumption design, automatic shutdown without spot welding after power on. When power on and spot welding is not used for five minutes, the system will automatically shut down, and it will be in zero power consumption state after power off. If it is fully charged and not used, it can be standby for more than one year with zero power consumption in theory. There is no need to worry that shelving will damage the battery.
9. Anti hot design of spot welding pen. The spot welding pen wrapped by polymer insulating material, which has the function of thermal insulation. It’s a good news for customers who use it a lot. If you don’t have this design, imagine the instantaneous current of several hundred amperes when spot welding, and a little internal resistance can also produce considerable heat. It’s not normal if you don’t use it for a long time. Our thermal insulation design, test from full charge to low power automatic shutdown, temperature is also appropriate, not hot to can’t use, so pro you rest assured to use.
Package Included:
1 x Spot welding machine
2 x Soldering pen
1 x Charging line
5 x Abrasive paper
1 x 5m nickel belt
Note:
1. Welding pressure is too tight contact resistance will lead to welding is not on, pressure is too light connection.
2. Touch bad also can not be welded. Please practice a few times to find the best feel welding, as light as possible press to weld. (Please fully charge the battery before using it for the first time)
Detail Pictures:
Availability: 
Shipping: Free Airmail 
Reviews
There are no reviews yet.