Mode group A, Keep the H03 main operation way.
Mode group B, Customized operation way with editable.
1 x USB magnetic charging cable
1 x Magnet replace rubber pad
1 x Operators manual
1 x Warranty card
1 x Spare O-ring
1 x Lanyard
1 x Clip
Operation:
● Battery installation and replace the magnet
– Insert the battery into the flashlight, the battery positive pole toward the light head
– Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries
– Ensure when the light turning on, the beam is directed away from the eyes
● When taking the light with bankcards (magnetic) or phone, it should replace the magnet with rubber pad.
● Turn on/off & modes transfer
– Transfer Mode A / Mode B:
When the headlight is turned off without lockout, hold press side switch 5 seconds, the light will flash three times faster than flash three times slower
● Mode Group A
– When the flashlight was off status: click the switch to memorized brightness level, quickly double click switch to Turbo (T1/T2), quickly triple-click switch to Strobe (S1) mode, press switch 0.5 seconds to Low (L1/L2) mode
– When the flashlight was on (any mode) status: press and hold the side switch 0.5 seconds to turn off
– Brightness and mode selection
Brightness level: press side switch to Low-Mid-High-Turbo, cycle, quickly double press the side switch to Sub-level (eg, between L1 and L2), turn off memorized the last brightness, quickly triple press to special modes
– Special modes: quickly triple press the side switch to Strobe (S1), then double-click to switch S1/S2/S3 mode, press side switch back to the previous brightness level
● Mode Group B
– When the flashlight was off status: click the switch to memorized brightness level, press switch 0.5 sec, to L2, quickly double click switch to Turbo (T1) mode, quickly triple press to Special modes (S1)
– When the flashlight was on (any mode) status: click the switch to turn off
– On commonly used levels (editable): hold press switch, brightness levels automatic cycle, and selected mode by button released, click the switch to turn off, quickly triple press enter to edit levels
– On special modes: quickly double click switch to transfer mode S1/S2/S3, click switch to turn off, hold press side switch 1 second to adjust the S1/S2/S3 brightness output level in Low, medium or high, quickly triple press to restore to the factory default flash modes
Edit Levels:
– Support to 2-7 common used levels can be selected
– Enter to edit level, 7 levels circle automatically
– The selected level, side switch indicator is on
– Not selected brightness, side switch indicator is off
– Factory’s default levels: L2-M2-H2-T2 (the indicator light on synchronously when levels automatic cycles)
– Click side switch to turn on/off the corresponding indicator.
– All selected finished, hold press 1 second the side switch save selected and quit edit mode
– The light will be flash three times, and back to the lowest selected level
– Restore the factory default levels: enter to edit level, then click side switch three times (light will be turn off after three clicks)
Location Indicator, Lock-out Function:
When turning off the flashlight, press switch 1.5 seconds, location indicator switch on and lock-out function activation at the same time, click double click the switch to turn on/off the indicator, the indicator light flashes every second, locate the flashlight, easy to find the flashlight in the dark quickly
Press switch 1.5 sec, switch unlock and enter into low mode
Power Indicator:
– Every time turn on, the side indicator will be light 5 seconds to display the battery power
– Blink four times: battery power in 100%-80%
– Blink three times: battery power in 80%-50%
– Blink twice: battery power in 50%-20%
– Blink one time: battery power below 20%
Reviews
There are no reviews yet.