Waterproof 1080P HD Bike Motorcycle Camcorder Sport Camera Recorder DV Digital Video

Description:
It’s ultra-slim and has an integrated look design.  
This product can be used for a wide range of purposes and it’s an essential   
recording medium for vehicle data recording, mountain climbing,  Skiing,
cycling, Parachuting, diving, hunting etc applications.
It has a variety of industry-leading features including digital video recording, 
photo camera, USB 2.0 high speed and battery charger functions
– Super mini portable size
– 8.0mega pixels high definition lens with 170 degree wide angle
– water-proof up to 30 meters depth
– Replaceable Lithium battery
– Video Recording while charging
– Automatic cycle cover camera,
  covering time can be adjusted freely between 3 to 6 points
– Support Micro SD card up to 32GB
– PC webcam
– Built-in vibrating motor

Specification:

Instruction:
1, USB port
2, U Drive mode
3, Video recording while charging mode
4, MIC hole
5, Video recording mode
6, Camera mode
7, Micro SD
8, Battery
9, On and Off button/ function button
10, Lens

IV.Basic operation:
  I. USB DRIVE MODE     
   The conversion key is under the U disk mode,
   when connect to the compute, it’s U disk mode.
   You can play the files of Micro SD card and delete the unnecessary files
 
 II. Webcam mode
  Transformation key in the U disk mode,
  connecting to the computer is a U disk model,
  can be played and delete the video files in the MICRO SD.
  Conversion button under the U disk mode,
  it will be show the removable disk card when you connect the computer. 
  click the power button, open the computer in the root directory,
  will be a sign of a camera,
  click on the camera symbol can be entered into a webcam model
 
 III. Video recording while charging mode
    Conversion key under the recording while charging,
connecting computer or car charging source, press the product function key,     
camera into the recording video while the charging or taking pictures.
while in the state of charging 
 
   Note: when recording video while charging,
    please press the function key to save the file before you exit the USB,
    otherwise it will not be able to save the video file 
 
IV.Battery charging
  1.with charger: Connect one end of the data cable with the charger that comes
     with the camera and the other end with the video camera,plug into the power.
  2.With computer: Connect one end of the USB cable with the computer
    and the other end with the video camera.
  3.With car battery charger: Connect the car battery charger directly
    with the camera’s USB interface.
  4. When the camera is in the charging, the red light flashing slowly,
    the red light on after a full charged.
 
V. Inserting and removing Micro SD card:
1.Insert the Micro SD card into the card slot as indicated until it’s fixed.
2.Press down the Micro SD card and wait until it pops out.then remove the card.
 
Cautions:
1.Please insert the card in the right direction into the device to avoid damage.
2.If the card is incompatible with the device,Please insert it again or try a new card.
3.Please use genuine Micro SD card.
 
VI. Operation of special features:
Video Recording and Photo-shooting
1. Under the video mode, long press the power button ⑨,
    product vibration continually which means the camera open,
    blue light long on,  video into standby mode,
    short press the function key⑨began to start video, blue lights flash slowly,
    then short press function key⑨ to pause and save the video files.
 
2. Camera opens, the mode key in photo-shooting mode,
the red light long on and enter into the photo standby mode,
short press the function⑨,
    the camera will shoot continually , take a picture every 3 seconds,
    red light flash slowly , if you need suspended, short press the function key⑨,
    Please Note: in standby mode,
the camera automatically shut down without any operating in 2 minutes.
 
 
VII. Time Setting:
Time display is default for this product. Follow the instructions as below
If you want to delete the time display on the video
1. Create a new Time File under the root directory. Edit the time in
yyyy.mm.dd.hr:min:sec N 3  format  (e.g.  2012.09.09 12:30:00 N 3).
Save and exit the file, the time setting is completed. And it will
not be displayed next time when you turn on the camera.
 
2. Follow the following instructions if you want the time to be
displayed on the camera: Create a new Time File under the root directory.
Edit the time in yyyy.mm.dd hr:min:sec Y 3  format (e.g. 2012.09.09 12:30:00 Y 3).
Save and exit the file,  the time modification is now completed.
And time will be displayed next time when you turn on the camera.
If need to modify the cycle time,
can change at the end of the format "3" to the cycle time you want.
 Note: "Y" represents time in format,
       "N" means no time display,
       "3" means the loop video recording and every 3 minutes to save a file,
  (can be set up for 3 to 6 minutes, not in this range,
  the camera loop in 3 minutes by default.)